26 ms·
I am also a farmer and inventor based in India. Problem is that we do not have many tools, indian made tools cost 3-4x of Chinese tools and have 2x worse quali
by wolfretcrap 5y ago
I am also a farmer and inventor based in India.
Problem is that we do not have many tools, indian made tools cost 3-4x of Chinese tools and have 2x worse quality on average
80% things which exist in West (made in China) does not exist in India on top India doesn't make many things.
Plus we suffer from too many middlemen problem, where the end product is inflated away beyond the affordability of masses.
Not everything is available in India, when I lived in US and Germany, I felt as if I was living in heaven I could order any part and it will be at my desk within a day or two but here in India you can have money yet you'll not find what you need.
India doesn't have any marketplace for makers like Ebay or even McMasterCar.
In small cities getting even the right size bolt, nut and screws is damnn too difficult let alone compression fittings etc.. which are more involved.
Surprisingly no startup has taken this issue seriously.
As the inflation has increased, labor cost has also significantly increased and more Indians are forced to take DIY approach thanks to abundant wealth of knowledge available from youtube and reddit experts (now even homeless people on streets can be seen chatting on WhatsApp with their friends, data has got so cheap)
Material availability still a major problem outside of the big cities with 10 million+ population. Most startup founders (people with resources, knowledge, network) also live in big cities so they don't really know what problems 70% of Indians face who are still living in villages, towns and small cities.
- jacquesm 5y agoYes, this is a very good point. Access to good tools is essential to do this kind of work safely, you can have all the knowledge in the world, if you can't measure accurately, test your welds non-destructively, machine things without adding stresses that the material is ill equipped to handle and assemble properly then it is very easy to mess things up in a critical way. Miss an inclusion in a weld (which could very easily happen), have some vibration due to imbalance, a hairline fracture from metal fatigue and with a helicopter as your project it can only end in one way.
- dukeofdoom 5y agoWhen I visited India, I drove by this area where there were there were stalls with Indians breaking up old rusty equipment back into parts. Much respect. I think people in the west, don't have a clue how hard some people work for so little return.
- blueblisters 5y agoThis is so true. It sucks India does not have a hardware ecosystem similar to Shenzhen. There is no capital available for independent innovators who want to build hardware products. There are few skilled engineers who can develop the tooling required to make parts like screws, fittings etc. at a scale and price that makes sense for the market. Import duties to encourage import substitution have only made parts more expensive and made logistics more complex. I think the attention given to IT services and software companies and startups has left the hardware industry without talent or capital. If you can make 5-10x as a software engineer than a tooling engineer, it makes zero sense to study mechanical engineering.
- baybal2 5y agoGoogle T-Works Hyderabad
- wincy 5y agoSorry to hear that. It’s definitely a tragic story. I ordered some things from McMaster Carr just the other day and it arrived within a few days. I get frustrated sometimes when the parts I need have to ship from China and take a month. But they are cheap and they’ll arrive eventually. It’s definitely sad to see genius wasted because the tools just sometimes aren’t available in places like India. Thanks for this information, it’s easy living in the US to forget just how easy our lives are in so many different ways.
- wolfretcrap 5y ago>I get frustrated sometimes when the parts I need have to ship from China and take a month. But they are cheap and they’ll arrive eventually. This remind me of the time when some local makers were ordering parts from aliexpress it was talking on average 30-40 days to arrive at their door and they were only ordering the parts that could not be substituted easily. Then one day government of India decided to ban aliexpress.
- e3bc54b2 5y agoI was not aware Aliexpress got banned. What is the next best alternative?
- wolfretcrap 5y agoBanggood ships to India, they don't have everything that aliexpress has but I've been able to source stuff not available locally.
- sudosysgen 5y agoPerhaps Taobao?
- benhurmarcel 5y agoEven in Europe we don’t have an equivalent to McMaster Carr. We can certainly procure the materials we need, but as far as I know there’s nothing quite practical like that US shop.
- vishnugupta 5y agoAs a noob robotics learner I ran into tools challenges very early on. There are some online places but as you pointed out the quality is outright bad. I just gave up that hobby as i didn’t find it worth all the frustration. During a business trip to Berlin I visited a typical departmental store and was absolutely blown away by all sorts of tools being sold. I was like a kid in a candy store. I mean it wasn’t even a specialized store but a Walmart kind of generic store. Imagine how it’d be in a dedicated hardware store!
- kumarvvr 5y agoAgree so much. There is a huge gap in availability of quality components in India. Very difficult to get and even if we get, very costly. But I guess it is time for us to have stores like the ones in US, large hardware stores.
- datavirtue 5y agoWhere you can't find anything including anyone to help you? I have to source various hardware for building projects and with five big box stores within a few minutes of my house it is always an absolute pain, if not impossible, to find what I need. I walked into Menards the other day and couldn't get 2" cabinetry screws...a commonly stocked basic fastener. Our big box hardware stores have turned into seasonal home goods stores.
- 4gotunameagain 5y agoOne would assume that if you have the resources to attempt to build something that resembles a helicopter, you would have a way to source a cloth strip to tie yourself to the seat. Not trying to diminish the magnitude of the disaster, but I think your argument does not apply in this case
- trhway 5y agosorry, i think you don't get it - the point is that you don't have all the necessary things. Which things out of the missing things were really necessary - that is rearview 20/20. This time it was strip of cloth, other time it may be something else.
- sokoloff 5y agoI think there’s a counterpoint which is “while you may not have everything, it seems wise to use those things you do have.” I cannot fathom that a person with the skills, resources, and tenacity to DIY a helicopter could not lay their hands on at least a car seatbelt and a scooter helmet during the course of the project. I wouldn’t be surprised if the crash scene was within sight of both of those items. “Aviation in itself is not inherently dangerous. But to an even greater degree than the sea, it is terribly unforgiving of any carelessness, incapacity or neglect.”
- svrtknst 5y agoIt's also not just a strip of cloth - it's a decent strip of cloth, fasteners, nuts, bolts, washers, something to fasten the seatbelt etc. Which isn't a lot and I think this is an unfortunate oversight, but I can see it being a bit difficult to do properly. Of course, doing it improperly with a rope would probably have been better than not at all.
- jjk166 5y agoIf you don't have all the necessary parts for your helicopter, you shouldn't be trying to fly it. Maybe there are things that you don't truly need, but this is a terrible way to figure which.
- 5y ago
- LAC-Tech 5y agoWhat do you farm and invent? I work in Ag-Tech and I've got some interest in India, seems like a growing country (though still with a lot of issues as you point out...) Would love to hear about what you do.
- 4silvertooth 5y ago>India doesn't have any marketplace for makers like Ebay Never going to forgive flipkart for killing ebay india, it was a heaven for tinkereres.
- hkt 5y agoHas there ever been an attempt at solving the problem with a cooperatively owned retailer? They're a little old school but useful for changing markets that are dysfunctional, and overcoming a lack of capital by allowing members to combine their (individually too small) means. Similarly, are there groups where people with these interests communicate about how frustrated they are?
- amjd 5y agoAgree with this completely. Moreover, India as a country has a lax attitude towards safety. When you are fighting to get the basic stuff, the safety aspect does not even cross most people's minds. This can be observed pretty much everywhere. In most construction sites here we don't see the workers wearing hard hats, which are seen as a bare necessity in developed countries. As someone pointed out, in this case the accident could have been prevented by forming a makeshift seat-belt out of cloth, but the inventor probably wasn't thinking about safety at all.
- metalliqaz 5y agos/security/safety/g
- amjd 5y agoThanks, I knew it sounded a bit odd. :'D
- wolfretcrap 5y ago>In most construction sites here we don't see the workers wearing hard hats Well they do it mostly because laws are not strict in India even if they are its easy to bribe off the enforcer and this saves the contractor money while he maximize the profit. It's not that average Indian is more greedy than average European it's just the enforcement system in India is easy to bribe away, so risk for not following proper safety guidelines is less in India and an open opportunity to save money on protective gears. The true failure comes from average Indian not being able to demand better standards from those in power like Europeans have managed to.
- Aeolun 5y agoHe was able to procure helicopter parts, presumably he was able to procure a rope to tie himself down.
- sombremesa 5y agoYep, less of a parts and more of a culture issue w.r.t. the lack of safety mechanisms, though the difficulty in sourcing quality parts certainly played its part in this incident. All the cars have seat belts, so it would’ve been pretty easy to obtain one compared to the rest of the parts involved here. None of the auto rickshaws have seat belts, for example, and lots of construction workers forgo helmets. No one cares, and furthermore people exacerbate the issue by trying to fit as many people as possible into these vehicles. It’s a miracle that people wear helmets from time to time, though it’s still quite rare for pillion riders and whole families try to sit on two wheelers. Human life is cheap in India.
- wolfretcrap 5y ago>Yep, less of a parts and more of a culture issue w.r.t. the lack of safety mechanisms, though the difficulty in sourcing quality parts certainly played its part in this incident Who doesn't want to live longer? I even know a local welder who went to local welding supply store and all they had was shade 11 lens, through which he couldn't see a damn thing and now he welds without any shade. That's the state of affair in India. Sure in factories, boss doesn't pay for protective gears so the people who need the job have to do without it. Most autorikshaws are not driver owned, they are owned by some guy who probably owns a bunch of them and rents it out to drivers. Drivers get penalty left right on road from traffic police and lose a lot of money to repairs, rickshaw owner, fuel theft etc. At the end not much is left for the driver let alone for safety installs. As people become richer they stop using rickshaw and drive their own cars. Lot of people don't wear helmet because it's hot and humid in India and its really hard to wear it in 38*C in bright sun on 70% RH. An average person in India has so many problems, the general mood is agitated and forgetful as a result. Most look for escapes and might not even be paying attention to things on road.
- 5y ago
- t0rt01se 5y agoWhile there's some truth to this, I think there's often too much regard for 'jugaad' in many parts of India which sometimes just manifests as 'penny wise pound foolish' behaviour.
- spywaregorilla 5y agoI believe you when I read this, but my primary takeaway is that given these constraints, you should not try to build a homemade helicopter
- Abishek_Muthian 5y ago> Surprisingly no startup has taken this issue seriously. There are few tiny startups catering to small niche e.g. https://diy-india.com https://diy-india.com sells tiny screws, shafts etc. for reasonable price. But they hardly get the support needed to scale up to something like McMaster-Carr, Which the startups emulating western startups or EdTech startups get in India. With Chinese eCommerce sites banned, The time for entering this market has never been more lucrative. P.S. I run a validation platform and I have started to track this need-gap - https://needgap.com/problems/284-online-marketplace-for-hardware-tools-in-india-ecommerce-hardware https://needgap.com/problems/284-online-marketplace-for-hard...
- mekkkkkk 5y agoI read somewhere about the postal network in India and how it suffered from a widespread lack of organized addresses. If it's still true, perhaps this is a contributing factor to why it might be hard to keep up and achieve scale for eBay clones?
- wolfretcrap 5y agoNo logistics is no longer the issue. Arrival of amazon and Flipkart fueled lots of logistics companies, now it's all sorted and amazon delivers to even the remotest villages in India.
- chakkepolja 5y agoRemote villager here and no, amazon doesn't deliver here (have to go to nearby town). But I agree with your broader point.