kieranl

5 ms·

1.
by kieranl 10mo ago
No. But you might need a specific version of rocm built for your gpu. These are built on https://github.com/ROCm/TheRock Right now AI support on AMD is officially only on specific models. But they are working hard to t
2.
by kieranl 10mo ago
I got to see this in person at pacificon a few weeks ago. Also the creator is my friend from UIUC who I consider a brilliant rf/DSP engineer. The demo was able to show and end to end tx chain from gnuradio to a receiver. Really excite
3.
by kieranl 1y ago
Copilot supports it. And on windows you can try AMD tools like https://github.com/lemonade-sdk/lemonade to run arbitrary LLMs. AMD is actively developing support for the NPU.
4.
by kieranl 1y ago
I took my 7 and 6 year old and they loved it! We spent all our time looking at projects and booths. They have no interest in the talks. With that said, there are not that many kids below highschool age that were in attendance. It is more ge
5.
by kieranl 3y ago
You can adjust the brightness in the bios
6.
by kieranl 3y ago
The chassis is fully compatible with all previous framework laptops.
7.
by kieranl 3y ago
Most x-ray machines use multi spectral detectors that detect 2 or more x-ray wavelengths. This is used for basic material characterization.
8.
by kieranl 4y ago
As a hardware developer lvfs and fwupd is amazing. It has support for all kinds of standard update protocols. So if you build a product and use a standardized update mechanism, it is super easy to get updates on lvfs. The other thing that i
9.
by kieranl 4y ago
Atsc mandates ac-3. Ac-3 audio is actually dolby-d. They just could not call it Dolby in the standard so they renamed it to ac3 instead.
10.
by kieranl 4y ago
We have LVFS updates in lvfs testing but there is a bios capsule update bug that wipes the boot entries on update. Feedback from 3.07 was that some distros fail to boot after the update because they do not put a efi loader in the fallback p
11.
by kieranl 4y ago
The power consumption of this would be too high.
12.
by kieranl 5y ago
These are much simpler. Usually just a 555 setup as a triangle wave generator connected to a series of voltage controlled oscillator chips with a small amp, one per antenna.
13.
by kieranl 6y ago
Yep! Most do not require any custom drivers.
14.
by kieranl 6y ago
Working on it!
15.
by kieranl 6y ago
Tigerlake supports modern standby otherwise known as S0ix. We are also testing fingerprint support - but look out for Linux guides for instructions until things get upstreamed.
16.
by kieranl 6y ago
Yep the ISO layout has the \| key next to Z!
17.
by kieranl 6y ago
technically possible as all 4 ports support usb-c PD, but the modules are not big enough to support any reasonable capacity. It is a path to connect something like a slice battery that you could attach to the bottom however!
18.
by kieranl 6y ago
Nothing that goes outside the usb/displayport standards. We have to be compatible to support the passthrough card :).
19.
by kieranl 6y ago
We have no no fan/low fan support on our firmware backlog - basically reducing the SOC TDP to the point where the laptop becomes a passively cooled and does not require the fan. So you can have performance when you want it, and silence
20.
by kieranl 6y ago
We support USB4 - which has similar performance as thunderbolt 3. Multiple display pipes + USB + PCIE tunneling. It also supports 40gbps of aggregate bandwidth per port. Tigerlake also supports HBR3 with display compression - so you can run
21.
by kieranl 6y ago
We will open up the expansion card spec and share reference designs to enable partners and the community to build their own! I want it to be open as much as you do.
22.
by kieranl 6y ago
Kieran from Framework Here - Using it as my main machine for development running Ubuntu 20.04 right now. The main tweak is running a mainline kernel with some distributions as Tigerlake support is new.