fecal_henge

5 ms·

1.
by fecal_henge 2mo ago
I heard it was a variety they have in southern Spain that is particularly morish.
2.
by fecal_henge 2mo ago
They missed the port.
3.
by fecal_henge 2mo ago
Nor funny.
4.
by fecal_henge 2mo ago
Here is a likely scenario for the baby food/ adult diapers combo: Someone who suffered so much damage during childbirth that they are still struggling with their bowels by the time their baby is on solids. Hilarious! Edit: obligatory s
5.
by fecal_henge 2mo ago
See, a positive outcome from investing in inflated stock.
6.
by fecal_henge 2mo ago
The ultimate customers would certainly pay more than the face price which is what the scalpers pay, yet the scalpers get all the tickets. This is abnormal market behaviour.
7.
by fecal_henge 2mo ago
I cannot read that text.
8.
by fecal_henge 3mo ago
You Edison shill.
9.
by fecal_henge 3mo ago
I would guess 1x2 is that the wheel is 1m wide, 2m diameter. This would mean that there is a 1m^2 sized flap* that the wind pushes against. *technical term
10.
by fecal_henge 3mo ago
Perhaps because they are suggesting what they are doing is novel.
11.
by fecal_henge 3mo ago
Can I ask what the motive is to create agents to do this? Where is the profit?
12.
by fecal_henge 3mo ago
There is a lot of professional software that locks people in also.
13.
by fecal_henge 3mo ago
Eccentric, how dare you?
14.
by fecal_henge 3mo ago
Maybe for christmas you could get your mom a multi axis driving simulation rig.
15.
by fecal_henge 3mo ago
Yes but you have to drive.
16.
by fecal_henge 4mo ago
Nothing like historical inaccuracy to stirrup some controversy.
17.
by fecal_henge 4mo ago
Yes but much further in the future when someone else digs them up.
18.
by fecal_henge 5mo ago
I would think so, or by taking cross sections. Its hard to believe they have some miraculous geometry that needs guarding anyway. Maybe they are trying to dissuade people who might try to 3d print an impeller. 3d models for industrial fan m
19.
by fecal_henge 5mo ago
The paper might contain too much jargon for lawyers.
20.
by fecal_henge 5mo ago
Is it possible to resolve features on advanced nodes with xray machines? Or the etch and photograph method?
21.
by fecal_henge 5mo ago
How do you verify that the fab produces the design authentically? They could create a security vulnerability only they know how to exploit.
22.
by fecal_henge 6mo ago
Maybe he used banana as the scintillator.
23.
by fecal_henge 6mo ago
This is a very strange part, what with the upstream regulator circuit. My guess is that their efficiency stats dont include losses in the upstream regulator. 100 usd per unit doesnt seem that excessive.
24.
by fecal_henge 6mo ago
They make sense when you consider that 'on detector' electronics has all sorts of constraints that FPGAs cant compete on: Power, Density, Radiation hardness, Material budget.
25.
by fecal_henge 6mo ago
-48 to 48 claims something like 97% (load dependent of course). It also needs to arbitrate between two input supplies for glitchless redundancy, plus have PM bus and other spec mandated stuff. There is no technical reason why you cant go -4
26.
by fecal_henge 6mo ago
We go -48 -> 48 -> 12 -> 3v3,1v8 etc etc. If you went 48 straight to POL voltages then you would have horrific converter performance.
27.
by fecal_henge 6mo ago
I am STILL designing hardware for -48v telco standard. The first thing we do is convert -48 -> 48v. That's 4 square inches of PCB space we waste.
28.
by fecal_henge 6mo ago
Is a 155 throws enough to evaluate bias? Seems more times than I'd like to roll some dice, but not enough to gain enough measurement confidence. By what criteria is the person assigning the traffic light ratings? What about face coplan
29.
by fecal_henge 6mo ago
For a multiple IVF treatment case (a fancy hospital might have 40% cycle to birth rate remember) it would not be unusual to have ~100 actual injections.
30.
by fecal_henge 6mo ago
I had no idea what RGB was on my spec selection. Thank God I picked a boring opaque box. Must be quite a party in there.

More ›