Athrunen

4 ms·

1. 1.▲
   by Athrunen 5y ago

   As they added a paywall: https://archive.fo/4B7ee
2. 2.▲
   LEDs and the Magic of 16 Bit(blog.athrunen.dev)

   1 points by Athrunen 6y ago|0 comments
3. 3.▲
   MIDI Controlled RGBW Strips(blog.athrunen.dev)

   1 points by Athrunen 6y ago|0 comments
4. 4.▲
   Building a controller for self-made daylight lamps or softboxes(blog.athrunen.dev)

   1 points by Athrunen 7y ago|0 comments
5. 5.▲
   by Athrunen 7y ago

   Thanks for that information, was searching for "RGBAW" and got not that many results ^^
6. 6.▲
   by Athrunen 7y ago

   Thank you, I will definitely look into this.
7. 7.▲
   by Athrunen 7y ago

   Thanks, will try to take some in the near future.
8. 8.▲
   Experimenting with RGBW Color Mixing(blog.athrunen.dev)

   34 points by Athrunen 7y ago|8 comments
9. 9.▲
   by Athrunen 7y ago

   I am currently designing PCBs for my next post using EasyEDA, anything to pay attention to? I'm especially concerned about the track width and clearance and stuff. For 12V and I think a max of 8A I calculated 2mm width, 0.6mm clearance
10. 10.▲
    by Athrunen 7y ago

    Thanks for that information, but I learned that the esp32 is not 5V tolerant the hard way. ^^ Will fix the bit about the PWM in a second
11. 11.▲
    by Athrunen 7y ago

    Thank you, now I want to learn about hdl. ^^ Languagevise coming from C# and learning c or c++ for low-level programming was quite smooth, also coming from python was the hard part, that was a lot of comforts I had to give up. But as I am a
12. 12.▲
    by Athrunen 7y ago

    Thank you, the surprising amount of attention this got kinda hugged my website to death earlier ^^ And TIL that there is a distinction between programming on the hardware and programming the hardware, might be something to look into