8 ms·

The $40 Standup Desk

206 points by bkeepers 15y ago

hapless 15y ago
An inexpensive standing desk is nice, but I don't think I would be any happier standing continuously than sitting continuously. Unfortunately, rapidly adjustable sit/stand desks are insanely expensive. I think this person has found a heck of an in-between position. It's not $40, but it's a heck of a lot cheaper than a geekdesk. http://blog.melchua.com/2011/07/09/fitting-yourself-a-sit-to-stand-desk/ http://blog.melchua.com/2011/07/09/fitting-yourself-a-sit-to...
- nick_urban 15y ago
  How about a high desk that you can stand at, with a stool or drafting chair for when you want to sit? A tall chair seems a lot easier / cheaper than an adjustable desk.
  - hapless 15y ago
    I considered it. Tall ergonomic chairs are very expensive. A top-of-the-line aeron is about $700; the stool version is about $1200.
    - forgottenpaswrd 15y ago
      "Tall ergonomic chairs are very expensive." Do you need an ergonomic chair? In my experience ergonomic means with a too much bended back shape that will DISTORT(!) your natural spine shape. Unfortunately they use statistic to decide what is the ergonomic "best" shape, the problem is that people backs in the west have gotten less and less straight the same way they are getting more and more overweight. Instead of buying an expensive chair, in my opinion it is a best investment to buy a good book or take some good posture lessons that teach you how to sit, stand or sleep properly. Your back could support itself without effort if it is straight.
      - goblin89 15y ago
        I was of the similar opinion, but a research[0] suggests that sitting straight is not actually as healthy. I'd like to see a source which would confirm that sitting back causes distortion to spine shape. That said, I agree with you that an ergonomic chair would make little sense for a standing desk, as one will obviously sit less (only when too tired to stand). [0] http://news.bbc.co.uk/2/hi/6187080.stm http://news.bbc.co.uk/2/hi/6187080.stm (2006)
        hapless 15y ago
        I don't think it's obvious at all. I prefer to sit, but I am by nature a restless individual. A standing desk would allow me to make some of my pacing time productive. To put it another way: every person may have a different use pattern when given the option of equal comfort at seated and standing heights.
  - drhodes 15y ago
    I do this. I put my chair on a riser and it works just fine.
- gecko 15y ago
  I personally find that I rarely sit down at my desk, except for extremely long coding sessions. Having the ability to easily adjust my stance, wake a walk, flex my knees, and the like makes a huge difference. Your mileage may vary, obviously.
- tbrownaw 15y ago
  Why not have a desk fixed at standing-height, and a stool / tall chair adjusted so that sitting in it leaves you at the same height as standing?
  - tomjen3 15y ago
    Because then you would be forced to sit with your legs dangeling -- and that gets pretty uncomfortable too.
    - tbrownaw 15y ago
      Most tall stools I've seen have something at about the right height to rest your feet on, whether just a brace between the legs of the stool or a ring that looks like it's intended as a footrest. Even without that, a detached footrest would still be rather easy to find.
    - forgottenpaswrd 15y ago
      "Because then you would be forced to sit with your legs dangling" Most stools let you adjust the height without problems, so you could put your feet on the floor. Some of them you could even attach to the floor, so you could use it as a support.
    - rhizome 15y ago
      You'd probably want a stepstool or applebox anyway when you're standing, just to vary your feet positions. That could be used as a footrest when sitting.
- forgottenpaswrd 15y ago
  "An inexpensive standing desk is nice, but I don't think I would be any happier standing continuously than sitting continuously." You don't need to. You could buy a stool and sit down when you need it or want to. For me, it took 3 months to get the muscles necessary for standing up developed, and 6 to learn a correct posture good for my joints. Today I use a wall as support for my back while standing while I use the computer attached to another wall with a mechanic arm(vesa tv mount with an imac adapter). This is by far the best idea I could have, it feels totally different to work standing up.
- jackalope 15y ago
  ...I don't think I would be any happier standing continuously than sitting continuously. I came to the same conclusion after switching to a standing desk for a few months. Now I'm using a yoga ball and it's amazing. It's immediately intuitive: just sit on it and shift to another comfortable position if you've been in one place too long. My core is even getting stronger from balancing (although it doesn't feel like a workout). I have a 65cm one for desk-height and a 75cm one for counter-height. I highly recommend it.
- jfoldi 15y ago
  You should give it a shot for a week. I had facilities adjust one of the tables in my cube to be a standing desk and I'm very happy with the results.
- deleted 15y ago
  [deleted]
- gte910h 15y ago
  For everyone suggesting to you to use a stool: I find a stool not really a valuable fatigue reducer compared to a real chair. I couldn't handle standing all day, and the stool was better, but not great. I finally bit the bullet and went fully adjustable with a real chair, and it's so worth it.
metaobject 15y ago
The free startup desk: your kitchen/dining room table (or, it you don't have one of those: two cardboard boxes and a piece of wood)
- nsxwolf 15y ago
  You misread the title.
  - metaobject 15y ago
    Yep, I sure did. Damn, I shouldn't post before 2 cups of coffee have been consumed. Sorry guys.
Jun8 15y ago
"Hanging a shelf is taught in Adulthood 101." I think I must have been sick the week they taught that. I still have great difficulty doing it (or building anything, working "with my hands").
- revorad 15y ago
  You just need some practice and you'll get the hang of it.
deleted 15y ago
[deleted]
hogu 15y ago
track shelving also works, and is adjustable after you install it.
marknutter 15y ago
I found that without being able to easily switch between sitting and standing, standing work stations will probably not work for most people. I bought a geek desk and it solves the problem beautifully, but having two separate desks for sitting and standing is a cheaper solution if you have the room for it (or having a very tall stool).
- dredmorbius 15y ago
  Desk and laptop + couch or comfortable chair works pretty well for me. Co-worker who had a stand-up desk frequently migrated to his in-office couch by afternoon.
- mnisjk 15y ago
  Agreed. A place I worked at previously had standing desks with "high chair" office chairs so you could easily sit at your desk as well.
- jay_l 15y ago
  After trying a non-adjustable standing desk that I built for a period of two weeks, I came to a similar conclusion. It initially felt pretty good, but after a few hours had passed I ended up taking a lot of breaks that I normally wouldn't have, simply because my legs couldn't keep up. Also, my feet were in some serious pain for the first few days, even with a thick floor mat, and continued to lightly ache afterwards. Anyone thinking about doing something similar may want to read this brief article about some of the potential risks in standing up all the time: http://healthland.time.com/2011/04/13/the-dangers-of-sitting-at-work%E2%80%94and-standing/ http://healthland.time.com/2011/04/13/the-dangers-of-sitting...
imperialWicket 15y ago
Senseless self plug - It's not adjustable, but for between $100-$200 (depending on quality of parts and whether or not you elect to sand/stain/seal) you can build this: http://imperialwicket.com/diy-adjustable-stand-up-desk-for-under-175 http://imperialwicket.com/diy-adjustable-stand-up-desk-for-u... . It's not quickly adjustable, but with the removal and replacement of some bolts, you can adjust the main desk area from 30" height all the way up to 52". Built into the cost are four additional shelves of various sizes. My idea was that if I was going to spend close to $200 on it, I wasn't terribly considered about quick adjustments (and I agree with nick_urban that a high stool/chair is perfect if necessary). However, I wanted to be sure that if I needed a non-standing desk in the future, this could be easily altered. I could also easily adjust it to accommodate visiting/alternative users - which is harder with many of the wall-mounted stand-up desks that are out there.
- andrenotgiant 15y ago
  That looks pretty cool, I also built my own adjustable stand-up/sit-down desk, albeit a more minimalist version. I'll have to draw out the plans like you did before I go touting the benefits of it, but I had quite a fun time designing and building it, as it seems you did. The basic idea of mine: The difference between a comfortable standing-desk height and sitting-desk height for me was 15 inches, so the desk surface is 15 inches deep, and can either fold up-and-out to be "Stand-up mode" or down-and-out to be "sit-down mode".
  - imperialWicket 15y ago
    That sounds excellent. I spent a long time thinking about techniques for expedient adjustment, and ended up deciding that I didn't trust my engineering skills (or lack thereof) enough to warrant the additional cost. I'm excited to see some more about your build, hope you can post details soon.
charlesju 15y ago
I just put a bunch of old computer books on my desk, in conjunction with a few Amazon boxes, and that seems to be sufficient. I actually have two desks. A standup desk AND a sitting desk, and I transfer my laptop between the two. This seems to be the best balance of sanity and health for me.
nilchameleons 15y ago
This is a great idea. I've always been more comfortable standing at a kitchen counter or using the adjustable-height computers we (no longer) have behind the genius bar.
jarin 15y ago
A little more expensive, but I made mine by taking an L-shaped IKEA Galant desk with extension and putting cinder blocks underneath the A-style legs. Felt pads are important to keep it from sliding off the blocks, but works great and gives you a TON of desk room :)
kylecordes 15y ago
I briefly tried an arrangement like this, which has just one surface for both keyboard and monitor. It worked horribly for me, though perhaps I am odd. It works much better to have the keyboard at a good keyboard height, and monitors at a good monitor height. I've built a couple variations over time, see my 2010 version partway down this page: http://kylecordes.com/2010/standing-desk http://kylecordes.com/2010/standing-desk
- icebraining 15y ago
  Same here. My keyboard is around one feet below the monitor.
wahnfrieden 15y ago
Either the keyboard is far too high, or the monitor far too low. This is like laptop proportions - awful ergonomics.
dmethvin 15y ago
Before you trust a few thousand dollars of equipment to this desk... The brackets there are mounted backwards; the long end should go against the wall. When they rate the brackets to hold 1000 pounds, it's based on a load at the center of the short side. But really the risk comes from the mounting. If you mount a 30-inch-deep hunk of desk on it there is a much higher stress on the mounting points since the long desk acts as a very effective lever. If you lean against the edge of the desk it may well pull the bracket out of the wall--especially if you use typical screws rather than lag bolts to mount it to the wall. If you are mounting something like this in a corner, as being done here, the whole setup could be strengthened by mounting a ledger board against the right-hand wall to support the entire depth of the desk. Really you should have a support on the front-left corner as well, which can be done either with a dowel or furniture leg (you can get either at a hardware store).
- Judson 15y ago
  I thought this at first, but if you look at a bracket like the one in the article on Amazon[1], it seems that they are mounted correctly, since amazon describes its depth as 19.5", and a height of 13". Those brackets are different than what I would call standard shelving brackets[2], which should be mounted with the long side against the wall. [1]:http://www.amazon.com/Black-Steel-Shelf-Bracket-19-1/dp/B001DT3SYC http://www.amazon.com/Black-Steel-Shelf-Bracket-19-1/dp/B001... [2]:http://www.grainger.com/Grainger/BATTALION-Utility-Shelf-Bracket-4PB71 http://www.grainger.com/Grainger/BATTALION-Utility-Shelf-Bra...
  - dmethvin 15y ago
    I've never seen a bracket meant to be intentionally mounted long-side-out, but I agree they seem to be advocating it there. You could do it if the loads were light, of course, but with a deep shelf and/or heavy loads it creates a lot of pull-out stress on the screws near the 90-degree bend.
- devmach 15y ago
  Quick tip : After drilling a wall you can clean the dust with vacuum cleaner and fill the hole ( not fully ) with quick drying plaster/cement and stick wall plug[1] in it. With this way you can be able to mount your stuff on almost every wall and the mounting will be stronger. It is useful if you live in a old apartment ( like most of the appartments in Germany... ) [1] : http://en.wikipedia.org/wiki/Wall_plug http://en.wikipedia.org/wiki/Wall_plug
chaostheory 15y ago
If you want a 'stand up desk' that is freestanding, IKEA has the FREDRIK in two variants for $119 and $149: http://www.ikea.com/us/en/catalog/products/00115992/ http://www.ikea.com/us/en/catalog/products/00115992/ http://www.ikea.com/us/en/catalog/products/60111123/ http://www.ikea.com/us/en/catalog/products/60111123/ It's easy to build. It's sturdy, and it looks good.
- jarcoal 15y ago
  I bought one of these and it works great: http://www.ikea.com/us/en/catalog/products/S89843460/#/S09843459 http://www.ikea.com/us/en/catalog/products/S89843460/#/S0984... They consider it a bar table, but it works perfectly as a standing desk.
  - MartinCron 15y ago
    At my height, bar tables are perfect standing desks, and bar stools are perfect if you want to sit down without having to think about changing desk height.
  - chaostheory 15y ago
    Wouldn't it be awkward over long hours though? Specifically wouldn't you want the keyboard near your waist and the monitor closer to your head, as opposed to bending to look at the screen; or having to raise your arms closer to your shoulders?
    - jarcoal 15y ago
      The keyboard is ~6 inches above my waistline, which feels perfect to me. The screens are the same distance from my head whether I'm standing or sitting. I keep a barstool by the desk for any periods when I am tired, although interestingly enough, I find that I sit when I'm learning, and stand when I'm producing (I'm a web dev). So exhaustion isn't the primary dictator of whether I'm standing or sitting.
      - chaostheory 15y ago
sreitshamer 15y ago
I just built some boxes out of plywood and put my existing desk on them. It was still a bit too low (my back was hurting) so I added a 2x4 on each side between the box and the desk leg until my back stopped hurting. Works great and very inexpensive!
simpsond 15y ago
For those who still sit 8+ hours a day: Work on the boss or setup a budget for an adjustable stand up desk. Having a fixed height requires that you adjust if you want to add a floor mat, wear different shoes, or want to throw a treadmill down. And sometimes, after standing for hours, you just want to sit down. Spending $800 dollars is justified for anything that is used 8 hours a day.
stevejalim 15y ago
Seems a good number people like the idea of a motorised adjustable desk, but the price is a deterrent. I have a GeekDesk, or what near-as-dammit is one, via a UK importer who gets them from Europe and, personally, it's been the best £400-500 [edit: $600-800 USD, give or take] I've spent on hardware, ever, given that I spent most of my waking hours sat/standing/leaning at it. But I appreciate that it's not an easy price point for everyone. So, question, with a view to a market opportunity for someone: how much would you be willing to pay for a strong, motorised, adjustable-height desk? Reply with a dollar figure, and if someone's already replied with a similar sum, upvote that instead. (Starting a whole poll seems OTT)
- imperialWicket 15y ago
  I would be comfortable at a $600 USD price point. The major issue for me is that the GeekDesk succeeds ONLY in the adjustable requirement. I want to be able to have my monitor and keyboards at different heights, and a secondary shelf was important (though not strictly necessary). When I consider paying nearly $1000 USD for a starter kit (GeekDesk large frame), then spec'ing out nearly $400 USD for additional monitor stands and a keyboard tray, it hardly seems worth it. I agree that it's a market where a motivated individual should be able to make a killing with a well-thought-out kickstarter proj.
  - stevejalim 15y ago
    Ah, good point. I should have added that I also got one of these: http://www.amazon.co.uk/MDM11S-Single-Monitor-Bracket-Pull-Out/dp/B001BSDVW4/ref=sr_1_15?ie=UTF8&qid=1326131871&sr=8-15 http://www.amazon.co.uk/MDM11S-Single-Monitor-Bracket-Pull-O... which takes care of my screen height [Edit: pic] http://dl.dropbox.com/u/44212/IMG_20120109_180019.jpg http://dl.dropbox.com/u/44212/IMG_20120109_180019.jpg
- rhizome 15y ago
  I don't know, man, but for those prices you'd think they could come in a color other than "cubicle."
- anigbrowl 15y ago
RShackleford 15y ago
fuck of sun of the bitch, world is not turn around fucking mac, mother fucker.
benvanderbeek 15y ago
"A stud finder or old man that knows how to knock on the wall and tell where the studs are." Would you just search Craigslist for the old man? Sounds tricky.
NHQ 15y ago
I built my own 3-tiered, sit-down or stand-up desk, link to pic below. Seated, the monitor is the right height for me, so as to keep my head up and neck straight. When I want to switch to standing, I just move the keyboard to the top level. I make the switch once or twice per day. And I can sit cross legged on the lowest platform (I dont like bucket/office chairs). That was v0.1 of the desk, constructed in a few hours. the As you can see it is not production ready :p http://blog.angelinegragasin.com/wp-content/uploads/2011/02/johnny.jpg http://blog.angelinegragasin.com/wp-content/uploads/2011/02/...
mpercy 15y ago
Cool idea. I've done the standup desk thing before at work with a tall chair as a sitting option. I actually ended up using the chair most of the time so I switched back to avoid constantly vaulting up and down, but it was an interesting experiment for about 2 years. One concern I would have about this particular configuration is the lack of a keyboard tray. Ergonomically, you would want your eyes about level with the top of the monitor or maybe a few inches below the top. At the same time, you want your keyboard to comfortably sit below so that you can keep your elbows at about 105 degrees or so. With the addition of a keyboard tray, and possibly a monitor stand, this can be a really nice long term ergonomic setup. Found some tips on ergonomics at the link below, and these are inline (no pun intended) with what I have heard from the mandatory ergonomics training at my employer. http://www.bellaonline.com/articles/art21940.asp http://www.bellaonline.com/articles/art21940.asp
wyclif 15y ago
Standing desk improv: http://instagr.am/p/GHAmP/ http://instagr.am/p/GHAmP/
beagle3 15y ago
I got this from amazon: http://www.amazon.com/gp/product/B000QA0EHI/ http://www.amazon.com/gp/product/B000QA0EHI/ - goes from too-low-to-sit to too-high-for-work (I'm 6' tall), is sturdy enough for a laptop, and has lockable wheels. Best $50 I've spent. Might not be able to carry your 26" screen if it is too heavy, but it's a damn good way to see how well you fair with an adjustable standing desk. And it also doubles as an over-the-bed desk ... Helpful suggestions: Attach a long-cord power strip to your mobile table, so that only one power goes out, and that it doesn't kill your non-magsafe-connector when someone kicks the power cable. Also, use a large binder clip to attach mouse/keyboard/monitor/network cables to the table if you use a laptop and take it with you often.
wyclif 15y ago
Industrial cart standing desk: http://stammy.com/post/3608383614/jayparkinsonmd-im-a-huge-fan-of-standing-desks http://stammy.com/post/3608383614/jayparkinsonmd-im-a-huge-f...
rwmj 15y ago
My walking desk, IIRC the cost was about $400: https://rwmj.wordpress.com/2010/01/25/treadmill-desk-part-6-hopefully-the-final-summary/#content https://rwmj.wordpress.com/2010/01/25/treadmill-desk-part-6-...
izak30 15y ago
I got this one http://www.ikea.com/us/en/catalog/products/S49843462/ http://www.ikea.com/us/en/catalog/products/S49843462/ They sell a stool that's the right height for when I do want to sit down, but it's uncomfortable enough that I do stand most of the time.
zerostar07 15y ago
My standup desk: Procrastinate on the ipad, walking around the house. Sit only when you write code.
dredmorbius 15y ago
There's a profession that's had standing desks for centuries. They're called draftsmen (architects, artists, and others). You'll find a great number of adjustable (height and angle) desks searching for "drafting table" with prices starting below $100 (new or used), and, well, as with much furniture, sky's the limit. They can be used as standing desks or (with a stool) as a seated workstation. As noted in comments below, many drafting stools have some sort of footrest. A few models (the less expensive ones look a bit unstable): http://www.google.com/products/catalog?q=drafting+table&cid=7023467640625048965&ei=vTsLT8i3EIqqiATlwOSKDA&ved=0CCQQ8wIwAg#p http://www.google.com/products/catalog?q=drafting+table&... http://www.google.com/products/catalog?q=drafting+table&cid=12338571972720315960&ei=vTsLT8i3EIqqiATlwOSKDA&ved=0CFAQ8wIwBQ#p http://www.google.com/products/catalog?q=drafting+table&... http://www.google.com/products/catalog?q=drafting+table&cid=17996206023319475075&ei=vTsLT8i3EIqqiATlwOSKDA&ved=0CGEQ8wIwBg#p http://www.google.com/products/catalog?q=drafting+table&... http://www.google.com/products/catalog?q=drafting+table&cid=1886506219101342025&ei=vTsLT8i3EIqqiATlwOSKDA&ved=0CIYBEPMCMAk#p http://www.google.com/products/catalog?q=drafting+table&... ... or search Craigslist. Add a monitor clamp/mount (either on the desk or on the wall behind it) and you've got a workstation solution. A hutch, shelving, or cabinet above, and an enclosed pedestal cabinet, and you've got a full desk.
fuzzythinker 15y ago
My $40 no mounting/screwing, better monitor height solution: http://dl.dropbox.com/u/36698/standingdesk.JPG http://dl.dropbox.com/u/36698/standingdesk.JPG Parts: * $20 - 4 legs + desk board: http://www.ikea.com/us/en/catalog/products/S79831622 http://www.ikea.com/us/en/catalog/products/S79831622 * $20 or less: boards from a hardware store, dimensions: - top monitor stand backing + side boards: 3 of ~12"ht x 10"depth - bottom backing + side boards: 3 of ~12"ht x 15"+ depth (can be narrower in depth if lean against wall) - monitor stand board: width desired x depth of monitor side boards - desk board: free with the ikea legs. If want different dimensions, depth should be at least 18" so monitor can further away from you. - bottom legs attachment board: width desired x depth of corresponding sides * optional: $20 plastic sliding keyboard drawer to keep papers/notes. Got mine from Frys.
zachrose 15y ago
$8 stand up desk: eight 8" cinder block cubes at about a dollar each. Stack two high under each desk leg. Throw a piece of lumber between the top front cubes for a footrest. At the very least it's the cheapest way to decide if you like a standing desk.
- zacharycohn 15y ago
  Free standing desk: Cardboard box on your desk.
Timothee 15y ago
It's funny how we (typically) are just fine spending thousands of dollars for electronics but have a hard time doing it for furniture. (I'm doing it myself: I'm on the couch or the dining table when I work at home) This guy has well over $2,000 on this $40 "desk", even though this equipment will lose a lot more value over time than a good desk. A MacBook Air will be worth barely anything in 5 years, while you can probably make a desk last half a career at least. Same for a good office chair.
- heyitsnick 15y ago
  I see the same responses in the comments thread of this blog. "$40 worth desk holding gadgets worth $4000? Seriously?" This line of reasoning makes no sense to me. Why does the cost of a desk need to match that of the stuff on it? Are you suggesting this home-made desk is not stable, that it puts the contents of it at risk? Sure looks stable to me. He might be able to justify $2000 on a Macbook Air because there may not be an alternative (depending on his work) or it may be justified with the perceived costs of the device. There's no point spending $800 on a desk if $40 does the job adequately. Cost is only loosely correlated to quality and value. It's the same line of thinking that goes "well you spend a third of your life sleeping so why do you spend only $200 on a mattress?" Perhaps because a cheap bed and mattress is perfectly comfortable for most people.
  - smackfu 15y ago
    Do you really think the people who are advocating spending more think the desk looks stable and sufficient? As you say, that makes no sense, so why assume that? Wouldn't it make more sense to think they feel differently about the quality of the desk?
    - Timothee 15y ago
      Regarding my original comment, while I don't think this desk is of good quality, I was trying to comment more on the mindset we have around this.
    - heyitsnick 15y ago
wr1472 15y ago
That's not a desk, that's a shelf attached to the wall.
jashmenn 15y ago
fwiw, I'm designing an open-source cardboard adjustable standing desk. Here is my crappy first version: http://i.imgur.com/QCEfp.jpg http://i.imgur.com/QCEfp.jpg http://i.imgur.com/LV5oC.jpg http://i.imgur.com/LV5oC.jpg replicatorblog is going to help me by suggesting some stability and aesthetics improvements, but if anyone else cares to join in, you're more than welcome. The slots will be cut-out so you can adjust according to your height. My goal is something that can by cut with a CNC/laser cutter and then sold for ~$20.
willimus 15y ago
Great low budget idea. My biggest gripe is that facing the wall is bad feng shui. I know that most folks consider feng shui a bunch of nonsense, but I like many of it's principals. http://www.ehow.com/video_4426322_feng-shui-desk-positioning-tips.html http://www.ehow.com/video_4426322_feng-shui-desk-positioning... There are several low cost desk choices at csnoffice.com. I have this roughly $300 desk: http://www.csnoffice.com/Safco-Products-Company-MUV-30-W-Height-Adjustable-Stand-Up-Workstation-SF1754.html http://www.csnoffice.com/Safco-Products-Company-MUV-30-W-Hei... Here's a $100 desk... http://www.csnoffice.com/RTA-Home-And-Office-Utility-Desk-or-Stand-in-Black-Glass-CT-015B-HAO1112.html http://www.csnoffice.com/RTA-Home-And-Office-Utility-Desk-or...
aedocw 15y ago
I've been a huge proponent of the standup desk for probably two years now.[1] One thing I see people get wrong ALL the time is the simple ergonomics - the top of the monitor should be at about eye level, and the keyboard should be just a little beneath the height of your elbows. I made a simple folding standup desk I could put on top of a regular desk[2] and it's been fantastic. Very simple, easily folds flat, and sits nicely on top of just about any desk or table. If anyone wants details (and the sketchup file I planned with) just let me know! [1]http://www.localconspiracy.com/2010/08/get-up-stand-up.html http://www.localconspiracy.com/2010/08/get-up-stand-up.html [2]https://picasaweb.google.com/christopheraedo/Simplestandup https://picasaweb.google.com/christopheraedo/Simplestandup
dkokelley 15y ago
I had a standup desk made from heavy-duty shelving storage (See: http://www.samsclub.com/sams/shop/product.jsp?productId=prod3790514&pid=CSE_Froogle&ci_src=14110944&ci_sku=sku4194514 http://www.samsclub.com/sams/shop/product.jsp?productId=prod...) I figured this would be good because I could have the surface area of 5 desks take the square footage of one. The only thing is that with this desk doing any sort of paperwork is impractical. I had a keyboard tray that pushed me out too far from the desk to lean over my paper/books, and the ergonomically ideal height for the monitor base was too high for me to comfortably reference papers. I switched to a simple IKEA corner desk and chair, and re-purposed my shelves to be regular storage (although I kept the space open for monitors, should I want to work standing on another computer.
gte910h 15y ago
This honestly looks like a great way to smash a $1000 ACD on the ground with great force. Shelf mounts aren't made for lots of shearing force cause by constant up and down pressure like that. While the desk looks cool, I give it about a 1:10 chance of coming off suddenly within 5 years of daily use.
MikeCapone 15y ago
It's strange to read this, because I was recently in almost the same position. I almost ordered a Geekdesk, but ended up getting a used IKEA Fredrik (sp?) desk and setting it up in a standing position. $50 instead of $1000, and pretty much the same result since I never sit down anymore anyways... I certainly recommend going the frugal route first; if it doesn't work out, you can always re-sell the desk on the used market and get the expensive model later.
georgieporgie 15y ago
The top of your monitor should be at eye level. I can't tell from the picture, but it looks like your setup will lead to neck strain.
malandrew 15y ago
The one thing that you miss with a desk like this is the ability to have a far off focal point behind your monitor. When you are working and thinking hard at a desk and you want to rest your eyes, it helps to have the space behind the monitor to be open so you can gaze off into the distance. Mounting the desk on the wall means that you can only gaze at a wall to rest your eyes. If I recall correctly, this design pattern is discussed in Christopher Alexander's "A Timeless Way of Building"
- rsaarelm 15y ago
  You could put a big mirror on the wall.
shn 15y ago
It looks like a wall shelf. Did you factor in the weight you would put if you lean on it with both of your hands or elbows. We do not lean on wall shelves but definitely lean on desks, and we do it unconsciously. May be we do not do it while we're standing, since I never tried working (with computers) standing.
joshwa 15y ago
My adjustable standing desk: $5? http://i.imgur.com/GfGpq.jpg http://i.imgur.com/GfGpq.jpg When I get tired I can switch from standing to sitting (use USB keyboard/mouse when sitting, laptop keyboard/mouse when standing). TL;DC: Laptop is on a bunch of small plastic storage boxes stacked on desk (and a random router box); keyboard/mouse on the desk surface.

206 points by bkeepers 15y ago

An inexpensive standing desk is nice, but I don't think I would be any happier standing continuously than sitting continuously. Unfortunately, rapidly adjustable sit/stand desks are insanely expensive. I think this person has found a heck of an in-between position. It's not $40, but it's a heck of a lot cheaper than a geekdesk. http://blog.melchua.com/2011/07/09/fitting-yourself-a-sit-to-stand-desk/ http://blog.melchua.com/2011/07/09/fitting-yourself-a-sit-to...

nick_urban 15y ago
How about a high desk that you can stand at, with a stool or drafting chair for when you want to sit? A tall chair seems a lot easier / cheaper than an adjustable desk.
- hapless 15y ago
  I considered it. Tall ergonomic chairs are very expensive. A top-of-the-line aeron is about $700; the stool version is about $1200.
  - forgottenpaswrd 15y ago
    "Tall ergonomic chairs are very expensive." Do you need an ergonomic chair? In my experience ergonomic means with a too much bended back shape that will DISTORT(!) your natural spine shape. Unfortunately they use statistic to decide what is the ergonomic "best" shape, the problem is that people backs in the west have gotten less and less straight the same way they are getting more and more overweight. Instead of buying an expensive chair, in my opinion it is a best investment to buy a good book or take some good posture lessons that teach you how to sit, stand or sleep properly. Your back could support itself without effort if it is straight.
    - goblin89 15y ago
      I was of the similar opinion, but a research[0] suggests that sitting straight is not actually as healthy. I'd like to see a source which would confirm that sitting back causes distortion to spine shape. That said, I agree with you that an ergonomic chair would make little sense for a standing desk, as one will obviously sit less (only when too tired to stand). [0] http://news.bbc.co.uk/2/hi/6187080.stm http://news.bbc.co.uk/2/hi/6187080.stm (2006)
      - hapless 15y ago
        I don't think it's obvious at all. I prefer to sit, but I am by nature a restless individual. A standing desk would allow me to make some of my pacing time productive. To put it another way: every person may have a different use pattern when given the option of equal comfort at seated and standing heights.
- drhodes 15y ago
  I do this. I put my chair on a riser and it works just fine.
gecko 15y ago
I personally find that I rarely sit down at my desk, except for extremely long coding sessions. Having the ability to easily adjust my stance, wake a walk, flex my knees, and the like makes a huge difference. Your mileage may vary, obviously.
tbrownaw 15y ago
Why not have a desk fixed at standing-height, and a stool / tall chair adjusted so that sitting in it leaves you at the same height as standing?
- tomjen3 15y ago
  Because then you would be forced to sit with your legs dangeling -- and that gets pretty uncomfortable too.
  - tbrownaw 15y ago
    Most tall stools I've seen have something at about the right height to rest your feet on, whether just a brace between the legs of the stool or a ring that looks like it's intended as a footrest. Even without that, a detached footrest would still be rather easy to find.
  - forgottenpaswrd 15y ago
    "Because then you would be forced to sit with your legs dangling" Most stools let you adjust the height without problems, so you could put your feet on the floor. Some of them you could even attach to the floor, so you could use it as a support.
  - rhizome 15y ago
    You'd probably want a stepstool or applebox anyway when you're standing, just to vary your feet positions. That could be used as a footrest when sitting.
forgottenpaswrd 15y ago
"An inexpensive standing desk is nice, but I don't think I would be any happier standing continuously than sitting continuously." You don't need to. You could buy a stool and sit down when you need it or want to. For me, it took 3 months to get the muscles necessary for standing up developed, and 6 to learn a correct posture good for my joints. Today I use a wall as support for my back while standing while I use the computer attached to another wall with a mechanic arm(vesa tv mount with an imac adapter). This is by far the best idea I could have, it feels totally different to work standing up.
jackalope 15y ago
...I don't think I would be any happier standing continuously than sitting continuously. I came to the same conclusion after switching to a standing desk for a few months. Now I'm using a yoga ball and it's amazing. It's immediately intuitive: just sit on it and shift to another comfortable position if you've been in one place too long. My core is even getting stronger from balancing (although it doesn't feel like a workout). I have a 65cm one for desk-height and a 75cm one for counter-height. I highly recommend it.
jfoldi 15y ago
You should give it a shot for a week. I had facilities adjust one of the tables in my cube to be a standing desk and I'm very happy with the results.
deleted 15y ago
[deleted]
gte910h 15y ago
For everyone suggesting to you to use a stool: I find a stool not really a valuable fatigue reducer compared to a real chair. I couldn't handle standing all day, and the stool was better, but not great. I finally bit the bullet and went fully adjustable with a real chair, and it's so worth it.

metaobject 15y ago

The free startup desk: your kitchen/dining room table (or, it you don't have one of those: two cardboard boxes and a piece of wood)

nsxwolf 15y ago
You misread the title.
- metaobject 15y ago
  Yep, I sure did. Damn, I shouldn't post before 2 cups of coffee have been consumed. Sorry guys.

Jun8 15y ago

"Hanging a shelf is taught in Adulthood 101." I think I must have been sick the week they taught that. I still have great difficulty doing it (or building anything, working "with my hands").

revorad 15y ago
You just need some practice and you'll get the hang of it.

deleted 15y ago

[deleted]

hogu 15y ago

track shelving also works, and is adjustable after you install it.

marknutter 15y ago

I found that without being able to easily switch between sitting and standing, standing work stations will probably not work for most people. I bought a geek desk and it solves the problem beautifully, but having two separate desks for sitting and standing is a cheaper solution if you have the room for it (or having a very tall stool).

dredmorbius 15y ago
Desk and laptop + couch or comfortable chair works pretty well for me. Co-worker who had a stand-up desk frequently migrated to his in-office couch by afternoon.
mnisjk 15y ago
Agreed. A place I worked at previously had standing desks with "high chair" office chairs so you could easily sit at your desk as well.
jay_l 15y ago
After trying a non-adjustable standing desk that I built for a period of two weeks, I came to a similar conclusion. It initially felt pretty good, but after a few hours had passed I ended up taking a lot of breaks that I normally wouldn't have, simply because my legs couldn't keep up. Also, my feet were in some serious pain for the first few days, even with a thick floor mat, and continued to lightly ache afterwards. Anyone thinking about doing something similar may want to read this brief article about some of the potential risks in standing up all the time: http://healthland.time.com/2011/04/13/the-dangers-of-sitting-at-work%E2%80%94and-standing/ http://healthland.time.com/2011/04/13/the-dangers-of-sitting...

imperialWicket 15y ago

Senseless self plug - It's not adjustable, but for between $100-$200 (depending on quality of parts and whether or not you elect to sand/stain/seal) you can build this: http://imperialwicket.com/diy-adjustable-stand-up-desk-for-under-175 http://imperialwicket.com/diy-adjustable-stand-up-desk-for-u... . It's not quickly adjustable, but with the removal and replacement of some bolts, you can adjust the main desk area from 30" height all the way up to 52". Built into the cost are four additional shelves of various sizes. My idea was that if I was going to spend close to $200 on it, I wasn't terribly considered about quick adjustments (and I agree with nick_urban that a high stool/chair is perfect if necessary). However, I wanted to be sure that if I needed a non-standing desk in the future, this could be easily altered. I could also easily adjust it to accommodate visiting/alternative users - which is harder with many of the wall-mounted stand-up desks that are out there.

andrenotgiant 15y ago
That looks pretty cool, I also built my own adjustable stand-up/sit-down desk, albeit a more minimalist version. I'll have to draw out the plans like you did before I go touting the benefits of it, but I had quite a fun time designing and building it, as it seems you did. The basic idea of mine: The difference between a comfortable standing-desk height and sitting-desk height for me was 15 inches, so the desk surface is 15 inches deep, and can either fold up-and-out to be "Stand-up mode" or down-and-out to be "sit-down mode".
- imperialWicket 15y ago
  That sounds excellent. I spent a long time thinking about techniques for expedient adjustment, and ended up deciding that I didn't trust my engineering skills (or lack thereof) enough to warrant the additional cost. I'm excited to see some more about your build, hope you can post details soon.

charlesju 15y ago

I just put a bunch of old computer books on my desk, in conjunction with a few Amazon boxes, and that seems to be sufficient. I actually have two desks. A standup desk AND a sitting desk, and I transfer my laptop between the two. This seems to be the best balance of sanity and health for me.

nilchameleons 15y ago

This is a great idea. I've always been more comfortable standing at a kitchen counter or using the adjustable-height computers we (no longer) have behind the genius bar.

jarin 15y ago

A little more expensive, but I made mine by taking an L-shaped IKEA Galant desk with extension and putting cinder blocks underneath the A-style legs. Felt pads are important to keep it from sliding off the blocks, but works great and gives you a TON of desk room :)

kylecordes 15y ago

I briefly tried an arrangement like this, which has just one surface for both keyboard and monitor. It worked horribly for me, though perhaps I am odd. It works much better to have the keyboard at a good keyboard height, and monitors at a good monitor height. I've built a couple variations over time, see my 2010 version partway down this page: http://kylecordes.com/2010/standing-desk http://kylecordes.com/2010/standing-desk

icebraining 15y ago
Same here. My keyboard is around one feet below the monitor.

wahnfrieden 15y ago

Either the keyboard is far too high, or the monitor far too low. This is like laptop proportions - awful ergonomics.

dmethvin 15y ago

Before you trust a few thousand dollars of equipment to this desk... The brackets there are mounted backwards; the long end should go against the wall. When they rate the brackets to hold 1000 pounds, it's based on a load at the center of the short side. But really the risk comes from the mounting. If you mount a 30-inch-deep hunk of desk on it there is a much higher stress on the mounting points since the long desk acts as a very effective lever. If you lean against the edge of the desk it may well pull the bracket out of the wall--especially if you use typical screws rather than lag bolts to mount it to the wall. If you are mounting something like this in a corner, as being done here, the whole setup could be strengthened by mounting a ledger board against the right-hand wall to support the entire depth of the desk. Really you should have a support on the front-left corner as well, which can be done either with a dowel or furniture leg (you can get either at a hardware store).

Judson 15y ago
I thought this at first, but if you look at a bracket like the one in the article on Amazon[1], it seems that they are mounted correctly, since amazon describes its depth as 19.5", and a height of 13". Those brackets are different than what I would call standard shelving brackets[2], which should be mounted with the long side against the wall. [1]:http://www.amazon.com/Black-Steel-Shelf-Bracket-19-1/dp/B001DT3SYC http://www.amazon.com/Black-Steel-Shelf-Bracket-19-1/dp/B001... [2]:http://www.grainger.com/Grainger/BATTALION-Utility-Shelf-Bracket-4PB71 http://www.grainger.com/Grainger/BATTALION-Utility-Shelf-Bra...
- dmethvin 15y ago
  I've never seen a bracket meant to be intentionally mounted long-side-out, but I agree they seem to be advocating it there. You could do it if the loads were light, of course, but with a deep shelf and/or heavy loads it creates a lot of pull-out stress on the screws near the 90-degree bend.
devmach 15y ago
Quick tip : After drilling a wall you can clean the dust with vacuum cleaner and fill the hole ( not fully ) with quick drying plaster/cement and stick wall plug[1] in it. With this way you can be able to mount your stuff on almost every wall and the mounting will be stronger. It is useful if you live in a old apartment ( like most of the appartments in Germany... ) [1] : http://en.wikipedia.org/wiki/Wall_plug http://en.wikipedia.org/wiki/Wall_plug

chaostheory 15y ago

If you want a 'stand up desk' that is freestanding, IKEA has the FREDRIK in two variants for $119 and $149: http://www.ikea.com/us/en/catalog/products/00115992/ http://www.ikea.com/us/en/catalog/products/00115992/ http://www.ikea.com/us/en/catalog/products/60111123/ http://www.ikea.com/us/en/catalog/products/60111123/ It's easy to build. It's sturdy, and it looks good.

jarcoal 15y ago
I bought one of these and it works great: http://www.ikea.com/us/en/catalog/products/S89843460/#/S09843459 http://www.ikea.com/us/en/catalog/products/S89843460/#/S0984... They consider it a bar table, but it works perfectly as a standing desk.
- MartinCron 15y ago
  At my height, bar tables are perfect standing desks, and bar stools are perfect if you want to sit down without having to think about changing desk height.
- chaostheory 15y ago
  Wouldn't it be awkward over long hours though? Specifically wouldn't you want the keyboard near your waist and the monitor closer to your head, as opposed to bending to look at the screen; or having to raise your arms closer to your shoulders?
  - jarcoal 15y ago
    The keyboard is ~6 inches above my waistline, which feels perfect to me. The screens are the same distance from my head whether I'm standing or sitting. I keep a barstool by the desk for any periods when I am tired, although interestingly enough, I find that I sit when I'm learning, and stand when I'm producing (I'm a web dev). So exhaustion isn't the primary dictator of whether I'm standing or sitting.
    - chaostheory 15y ago

sreitshamer 15y ago

I just built some boxes out of plywood and put my existing desk on them. It was still a bit too low (my back was hurting) so I added a 2x4 on each side between the box and the desk leg until my back stopped hurting. Works great and very inexpensive!

simpsond 15y ago

For those who still sit 8+ hours a day: Work on the boss or setup a budget for an adjustable stand up desk. Having a fixed height requires that you adjust if you want to add a floor mat, wear different shoes, or want to throw a treadmill down. And sometimes, after standing for hours, you just want to sit down. Spending $800 dollars is justified for anything that is used 8 hours a day.

stevejalim 15y ago

Seems a good number people like the idea of a motorised adjustable desk, but the price is a deterrent. I have a GeekDesk, or what near-as-dammit is one, via a UK importer who gets them from Europe and, personally, it's been the best £400-500 [edit: $600-800 USD, give or take] I've spent on hardware, ever, given that I spent most of my waking hours sat/standing/leaning at it. But I appreciate that it's not an easy price point for everyone. So, question, with a view to a market opportunity for someone: how much would you be willing to pay for a strong, motorised, adjustable-height desk? Reply with a dollar figure, and if someone's already replied with a similar sum, upvote that instead. (Starting a whole poll seems OTT)

imperialWicket 15y ago
I would be comfortable at a $600 USD price point. The major issue for me is that the GeekDesk succeeds ONLY in the adjustable requirement. I want to be able to have my monitor and keyboards at different heights, and a secondary shelf was important (though not strictly necessary). When I consider paying nearly $1000 USD for a starter kit (GeekDesk large frame), then spec'ing out nearly $400 USD for additional monitor stands and a keyboard tray, it hardly seems worth it. I agree that it's a market where a motivated individual should be able to make a killing with a well-thought-out kickstarter proj.
- stevejalim 15y ago
  Ah, good point. I should have added that I also got one of these: http://www.amazon.co.uk/MDM11S-Single-Monitor-Bracket-Pull-Out/dp/B001BSDVW4/ref=sr_1_15?ie=UTF8&qid=1326131871&sr=8-15 http://www.amazon.co.uk/MDM11S-Single-Monitor-Bracket-Pull-O... which takes care of my screen height [Edit: pic] http://dl.dropbox.com/u/44212/IMG_20120109_180019.jpg http://dl.dropbox.com/u/44212/IMG_20120109_180019.jpg
rhizome 15y ago
I don't know, man, but for those prices you'd think they could come in a color other than "cubicle."
anigbrowl 15y ago

RShackleford 15y ago

fuck of sun of the bitch, world is not turn around fucking mac, mother fucker.

benvanderbeek 15y ago

"A stud finder or old man that knows how to knock on the wall and tell where the studs are." Would you just search Craigslist for the old man? Sounds tricky.

NHQ 15y ago

I built my own 3-tiered, sit-down or stand-up desk, link to pic below. Seated, the monitor is the right height for me, so as to keep my head up and neck straight. When I want to switch to standing, I just move the keyboard to the top level. I make the switch once or twice per day. And I can sit cross legged on the lowest platform (I dont like bucket/office chairs). That was v0.1 of the desk, constructed in a few hours. the As you can see it is not production ready :p http://blog.angelinegragasin.com/wp-content/uploads/2011/02/johnny.jpg http://blog.angelinegragasin.com/wp-content/uploads/2011/02/...

mpercy 15y ago

Cool idea. I've done the standup desk thing before at work with a tall chair as a sitting option. I actually ended up using the chair most of the time so I switched back to avoid constantly vaulting up and down, but it was an interesting experiment for about 2 years. One concern I would have about this particular configuration is the lack of a keyboard tray. Ergonomically, you would want your eyes about level with the top of the monitor or maybe a few inches below the top. At the same time, you want your keyboard to comfortably sit below so that you can keep your elbows at about 105 degrees or so. With the addition of a keyboard tray, and possibly a monitor stand, this can be a really nice long term ergonomic setup. Found some tips on ergonomics at the link below, and these are inline (no pun intended) with what I have heard from the mandatory ergonomics training at my employer. http://www.bellaonline.com/articles/art21940.asp http://www.bellaonline.com/articles/art21940.asp

wyclif 15y ago

Standing desk improv: http://instagr.am/p/GHAmP/ http://instagr.am/p/GHAmP/

beagle3 15y ago

I got this from amazon: http://www.amazon.com/gp/product/B000QA0EHI/ http://www.amazon.com/gp/product/B000QA0EHI/ - goes from too-low-to-sit to too-high-for-work (I'm 6' tall), is sturdy enough for a laptop, and has lockable wheels. Best $50 I've spent. Might not be able to carry your 26" screen if it is too heavy, but it's a damn good way to see how well you fair with an adjustable standing desk. And it also doubles as an over-the-bed desk ... Helpful suggestions: Attach a long-cord power strip to your mobile table, so that only one power goes out, and that it doesn't kill your non-magsafe-connector when someone kicks the power cable. Also, use a large binder clip to attach mouse/keyboard/monitor/network cables to the table if you use a laptop and take it with you often.

wyclif 15y ago

Industrial cart standing desk: http://stammy.com/post/3608383614/jayparkinsonmd-im-a-huge-fan-of-standing-desks http://stammy.com/post/3608383614/jayparkinsonmd-im-a-huge-f...

rwmj 15y ago

My walking desk, IIRC the cost was about $400: https://rwmj.wordpress.com/2010/01/25/treadmill-desk-part-6-hopefully-the-final-summary/#content https://rwmj.wordpress.com/2010/01/25/treadmill-desk-part-6-...

izak30 15y ago

I got this one http://www.ikea.com/us/en/catalog/products/S49843462/ http://www.ikea.com/us/en/catalog/products/S49843462/ They sell a stool that's the right height for when I do want to sit down, but it's uncomfortable enough that I do stand most of the time.

zerostar07 15y ago

My standup desk: Procrastinate on the ipad, walking around the house. Sit only when you write code.

dredmorbius 15y ago

There's a profession that's had standing desks for centuries. They're called draftsmen (architects, artists, and others). You'll find a great number of adjustable (height and angle) desks searching for "drafting table" with prices starting below $100 (new or used), and, well, as with much furniture, sky's the limit. They can be used as standing desks or (with a stool) as a seated workstation. As noted in comments below, many drafting stools have some sort of footrest. A few models (the less expensive ones look a bit unstable): http://www.google.com/products/catalog?q=drafting+table&cid=7023467640625048965&ei=vTsLT8i3EIqqiATlwOSKDA&ved=0CCQQ8wIwAg#p http://www.google.com/products/catalog?q=drafting+table&... http://www.google.com/products/catalog?q=drafting+table&cid=12338571972720315960&ei=vTsLT8i3EIqqiATlwOSKDA&ved=0CFAQ8wIwBQ#p http://www.google.com/products/catalog?q=drafting+table&... http://www.google.com/products/catalog?q=drafting+table&cid=17996206023319475075&ei=vTsLT8i3EIqqiATlwOSKDA&ved=0CGEQ8wIwBg#p http://www.google.com/products/catalog?q=drafting+table&... http://www.google.com/products/catalog?q=drafting+table&cid=1886506219101342025&ei=vTsLT8i3EIqqiATlwOSKDA&ved=0CIYBEPMCMAk#p http://www.google.com/products/catalog?q=drafting+table&... ... or search Craigslist. Add a monitor clamp/mount (either on the desk or on the wall behind it) and you've got a workstation solution. A hutch, shelving, or cabinet above, and an enclosed pedestal cabinet, and you've got a full desk.

fuzzythinker 15y ago

My $40 no mounting/screwing, better monitor height solution: http://dl.dropbox.com/u/36698/standingdesk.JPG http://dl.dropbox.com/u/36698/standingdesk.JPG Parts: * $20 - 4 legs + desk board: http://www.ikea.com/us/en/catalog/products/S79831622 http://www.ikea.com/us/en/catalog/products/S79831622 * $20 or less: boards from a hardware store, dimensions: - top monitor stand backing + side boards: 3 of ~12"ht x 10"depth - bottom backing + side boards: 3 of ~12"ht x 15"+ depth (can be narrower in depth if lean against wall) - monitor stand board: width desired x depth of monitor side boards - desk board: free with the ikea legs. If want different dimensions, depth should be at least 18" so monitor can further away from you. - bottom legs attachment board: width desired x depth of corresponding sides * optional: $20 plastic sliding keyboard drawer to keep papers/notes. Got mine from Frys.

zachrose 15y ago

$8 stand up desk: eight 8" cinder block cubes at about a dollar each. Stack two high under each desk leg. Throw a piece of lumber between the top front cubes for a footrest. At the very least it's the cheapest way to decide if you like a standing desk.

zacharycohn 15y ago
Free standing desk: Cardboard box on your desk.

Timothee 15y ago

It's funny how we (typically) are just fine spending thousands of dollars for electronics but have a hard time doing it for furniture. (I'm doing it myself: I'm on the couch or the dining table when I work at home) This guy has well over $2,000 on this $40 "desk", even though this equipment will lose a lot more value over time than a good desk. A MacBook Air will be worth barely anything in 5 years, while you can probably make a desk last half a career at least. Same for a good office chair.

heyitsnick 15y ago
I see the same responses in the comments thread of this blog. "$40 worth desk holding gadgets worth $4000? Seriously?" This line of reasoning makes no sense to me. Why does the cost of a desk need to match that of the stuff on it? Are you suggesting this home-made desk is not stable, that it puts the contents of it at risk? Sure looks stable to me. He might be able to justify $2000 on a Macbook Air because there may not be an alternative (depending on his work) or it may be justified with the perceived costs of the device. There's no point spending $800 on a desk if $40 does the job adequately. Cost is only loosely correlated to quality and value. It's the same line of thinking that goes "well you spend a third of your life sleeping so why do you spend only $200 on a mattress?" Perhaps because a cheap bed and mattress is perfectly comfortable for most people.
- smackfu 15y ago
  Do you really think the people who are advocating spending more think the desk looks stable and sufficient? As you say, that makes no sense, so why assume that? Wouldn't it make more sense to think they feel differently about the quality of the desk?
  - Timothee 15y ago
    Regarding my original comment, while I don't think this desk is of good quality, I was trying to comment more on the mindset we have around this.
  - heyitsnick 15y ago

wr1472 15y ago

That's not a desk, that's a shelf attached to the wall.

jashmenn 15y ago

fwiw, I'm designing an open-source cardboard adjustable standing desk. Here is my crappy first version: http://i.imgur.com/QCEfp.jpg http://i.imgur.com/QCEfp.jpg http://i.imgur.com/LV5oC.jpg http://i.imgur.com/LV5oC.jpg replicatorblog is going to help me by suggesting some stability and aesthetics improvements, but if anyone else cares to join in, you're more than welcome. The slots will be cut-out so you can adjust according to your height. My goal is something that can by cut with a CNC/laser cutter and then sold for ~$20.

willimus 15y ago

Great low budget idea. My biggest gripe is that facing the wall is bad feng shui. I know that most folks consider feng shui a bunch of nonsense, but I like many of it's principals. http://www.ehow.com/video_4426322_feng-shui-desk-positioning-tips.html http://www.ehow.com/video_4426322_feng-shui-desk-positioning... There are several low cost desk choices at csnoffice.com. I have this roughly $300 desk: http://www.csnoffice.com/Safco-Products-Company-MUV-30-W-Height-Adjustable-Stand-Up-Workstation-SF1754.html http://www.csnoffice.com/Safco-Products-Company-MUV-30-W-Hei... Here's a $100 desk... http://www.csnoffice.com/RTA-Home-And-Office-Utility-Desk-or-Stand-in-Black-Glass-CT-015B-HAO1112.html http://www.csnoffice.com/RTA-Home-And-Office-Utility-Desk-or...

aedocw 15y ago

I've been a huge proponent of the standup desk for probably two years now.[1] One thing I see people get wrong ALL the time is the simple ergonomics - the top of the monitor should be at about eye level, and the keyboard should be just a little beneath the height of your elbows. I made a simple folding standup desk I could put on top of a regular desk[2] and it's been fantastic. Very simple, easily folds flat, and sits nicely on top of just about any desk or table. If anyone wants details (and the sketchup file I planned with) just let me know! [1]http://www.localconspiracy.com/2010/08/get-up-stand-up.html http://www.localconspiracy.com/2010/08/get-up-stand-up.html [2]https://picasaweb.google.com/christopheraedo/Simplestandup https://picasaweb.google.com/christopheraedo/Simplestandup

dkokelley 15y ago

I had a standup desk made from heavy-duty shelving storage (See: http://www.samsclub.com/sams/shop/product.jsp?productId=prod3790514&pid=CSE_Froogle&ci_src=14110944&ci_sku=sku4194514 http://www.samsclub.com/sams/shop/product.jsp?productId=prod...) I figured this would be good because I could have the surface area of 5 desks take the square footage of one. The only thing is that with this desk doing any sort of paperwork is impractical. I had a keyboard tray that pushed me out too far from the desk to lean over my paper/books, and the ergonomically ideal height for the monitor base was too high for me to comfortably reference papers. I switched to a simple IKEA corner desk and chair, and re-purposed my shelves to be regular storage (although I kept the space open for monitors, should I want to work standing on another computer.

gte910h 15y ago

This honestly looks like a great way to smash a $1000 ACD on the ground with great force. Shelf mounts aren't made for lots of shearing force cause by constant up and down pressure like that. While the desk looks cool, I give it about a 1:10 chance of coming off suddenly within 5 years of daily use.

MikeCapone 15y ago

It's strange to read this, because I was recently in almost the same position. I almost ordered a Geekdesk, but ended up getting a used IKEA Fredrik (sp?) desk and setting it up in a standing position. $50 instead of $1000, and pretty much the same result since I never sit down anymore anyways... I certainly recommend going the frugal route first; if it doesn't work out, you can always re-sell the desk on the used market and get the expensive model later.

georgieporgie 15y ago

The top of your monitor should be at eye level. I can't tell from the picture, but it looks like your setup will lead to neck strain.

malandrew 15y ago

The one thing that you miss with a desk like this is the ability to have a far off focal point behind your monitor. When you are working and thinking hard at a desk and you want to rest your eyes, it helps to have the space behind the monitor to be open so you can gaze off into the distance. Mounting the desk on the wall means that you can only gaze at a wall to rest your eyes. If I recall correctly, this design pattern is discussed in Christopher Alexander's "A Timeless Way of Building"

rsaarelm 15y ago
You could put a big mirror on the wall.

shn 15y ago

It looks like a wall shelf. Did you factor in the weight you would put if you lean on it with both of your hands or elbows. We do not lean on wall shelves but definitely lean on desks, and we do it unconsciously. May be we do not do it while we're standing, since I never tried working (with computers) standing.

joshwa 15y ago

My adjustable standing desk: $5? http://i.imgur.com/GfGpq.jpg http://i.imgur.com/GfGpq.jpg When I get tired I can switch from standing to sitting (use USB keyboard/mouse when sitting, laptop keyboard/mouse when standing). TL;DC: Laptop is on a bunch of small plastic storage boxes stacked on desk (and a random router box); keyboard/mouse on the desk surface.