5 ms·
I started a UAV company several years ago. The biggest hurdle we faced was governed regulation. Not only was it nearly impossible to operate the things I the US
by schmidtc 12y ago
I started a UAV company several years ago. The biggest hurdle we faced was governed regulation. Not only was it nearly impossible to operate the things I the US, it was also exceedingly difficult to get an export license. I haven't been paying attention since I left the comply a few years ago, but it sounds like the regulations are getting better.
On the technical side we faced a few chanllanges. The first was reliability. Our planes were small <10 lbs, but would enevitly go down and be very difficult to recover. After the first couple crashes we designed a protective shell around the expensive bits. Causes of the crashes we always unique, from a loose connection, to interference.
The next biggest problem was battery life, ours was an electric system and getting more flight time in the tiny platform was difficult. This of course limited the range which limited it usefullness.
Otherwise, we solved the autonomy with off-the-shelve components (albeit military grade). Otherwise most other issues were resolved with software (flight planning, data recovery, etc).
Our application was aerial imaging, I imagine other applications would have another set of problems.
- schmidtc 12y agoForgot to mention, price was another difficult problem. We were trying to build a low cost system for academic use. The single most expensive component was the flight computer, there were some low cost alternatives, but at the time they didn't perform we'll enough. Perhaps this has changed.