5 ms·

I suggest finding something else, electrical tape starts coming off after a few years, leaving behind sticky residue that's impossible to remove without some ki

I suggest finding something else, electrical tape starts coming off after a few years, leaving behind sticky residue that's impossible to remove without some kind of solvent. Same goes for masking tape.

notpushkin 6d ago
Heatshrink?
- dns_snek 6d ago
  Heatshrink is great if you're making cables but you would need a really high shrinkage ratio to fit over the connector and then shrink enough, the common cheap stuff is usually 2:1, maybe 3:1. You could cut the heatshrink tube, wrap it around the cable and then secure it with transparent tape. It would slide around but at least it wouldn't leave residue on the cable. Maybe clip-on cable markers like this? [1] Easy to 3D print if you're so inclined. [1] https://uk.farnell.com/multicomp-pro/pb-250-sm0c/cable-marker-0-15-0-5mm-0-9-pk250/dp/1891367 https://uk.farnell.com/multicomp-pro/pb-250-sm0c/cable-marke...
  - notpushkin 6d ago
    I’ve thought about just putting it on the connector itself. It may look stupid though.
    - booty 6d ago
      Brother label printers (and I assume others) can print text small enough and sharp enough to fit onto USB connectors. (You'll need to manually trim the label with scissors to fit of course) Visually, if it's something I'm going to be staring at on a daily basis, I like this much better than having tags hanging off of the cable. Tip: consider white-on-black labels. The labels have been plenty durable in my experience, but if you need extra durability, you could probably just brush some lacquer over it with a Q-tip.
      - notpushkin 4d ago
        Man, I really need to get a label printer. There’s been a whole bunch of stuff I’d like to label already, but I’ve had no idea you could also change the font.
raro11 6d ago
I assume he labels the bag and never has the need to remove it (you just take a new bag). Edit: Nope I was wrong. Bad bad bad
zimpenfish 6d ago
I use wraparound cable labels[0] which seem to work ok (although do end up sliding up and down the cable to some extent.) [0] e.g. https://www.amazon.co.uk/dp/B0FQTX4MPL https://www.amazon.co.uk/dp/B0FQTX4MPL
IAmBroom 6d ago
I have 20 year old white duct tape on containers in my basement that has never peeled. It takes ink pretty well. Obviously hell if you need to remove it, but we're talking about permanent labels. If I need to change a label I just put on a fresh layer of tape.
LgWoodenBadger 6d ago
I've yet to find instances where electrical tape comes off of its own accord when wrapped. Even the electrical tape submerged 24x7 on my well pump had to be unwrapped.
mceachen 5d ago
I should have clarified: I use a 1" piece of maybe 5mm wide good quality 3M tape that wraps over itself. This follows (at least my local) electrical code--it's quite robust. I have 40 year old electrical conduit that has tape applied like this and there's no movement, no fraying, no stickiness.

notpushkin 6d ago

Heatshrink?

dns_snek 6d ago
Heatshrink is great if you're making cables but you would need a really high shrinkage ratio to fit over the connector and then shrink enough, the common cheap stuff is usually 2:1, maybe 3:1. You could cut the heatshrink tube, wrap it around the cable and then secure it with transparent tape. It would slide around but at least it wouldn't leave residue on the cable. Maybe clip-on cable markers like this? [1] Easy to 3D print if you're so inclined. [1] https://uk.farnell.com/multicomp-pro/pb-250-sm0c/cable-marker-0-15-0-5mm-0-9-pk250/dp/1891367 https://uk.farnell.com/multicomp-pro/pb-250-sm0c/cable-marke...
- notpushkin 6d ago
  I’ve thought about just putting it on the connector itself. It may look stupid though.
  - booty 6d ago
    Brother label printers (and I assume others) can print text small enough and sharp enough to fit onto USB connectors. (You'll need to manually trim the label with scissors to fit of course) Visually, if it's something I'm going to be staring at on a daily basis, I like this much better than having tags hanging off of the cable. Tip: consider white-on-black labels. The labels have been plenty durable in my experience, but if you need extra durability, you could probably just brush some lacquer over it with a Q-tip.
    - notpushkin 4d ago
      Man, I really need to get a label printer. There’s been a whole bunch of stuff I’d like to label already, but I’ve had no idea you could also change the font.

raro11 6d ago

I assume he labels the bag and never has the need to remove it (you just take a new bag). Edit: Nope I was wrong. Bad bad bad

zimpenfish 6d ago

I use wraparound cable labels[0] which seem to work ok (although do end up sliding up and down the cable to some extent.) [0] e.g. https://www.amazon.co.uk/dp/B0FQTX4MPL https://www.amazon.co.uk/dp/B0FQTX4MPL

IAmBroom 6d ago

I have 20 year old white duct tape on containers in my basement that has never peeled. It takes ink pretty well. Obviously hell if you need to remove it, but we're talking about permanent labels. If I need to change a label I just put on a fresh layer of tape.

LgWoodenBadger 6d ago

I've yet to find instances where electrical tape comes off of its own accord when wrapped. Even the electrical tape submerged 24x7 on my well pump had to be unwrapped.

mceachen 5d ago

I should have clarified: I use a 1" piece of maybe 5mm wide good quality 3M tape that wraps over itself. This follows (at least my local) electrical code--it's quite robust. I have 40 year old electrical conduit that has tape applied like this and there's no movement, no fraying, no stickiness.