7 ms·

None I know did. If you do your research, all the hype around Bambu is paid. Influencers pushed it. Tech deep dives show it is sub standard. Posted on HN. Prus

by 0xedd 8mo ago

None I know did. If you do your research, all the hype around Bambu is paid. Influencers pushed it. Tech deep dives show it is sub standard. Posted on HN. Prusa is king. High quality. Open source. EU made and engineered. Slicer is a market leader (Bambu's a fork of it).

bluescrn 8mo ago
Prusa may still be king if you're using printers commercially, running them hard 24/7 in a print farm, wanting to be sure your investment has a decent lifespan with readily-available spare parts and upgrade options. But it's a premium brand now. For lighter use by hobbyists, Bambu is the clear winner on price/performance. The 'less open' downside is not a factor to most people, and the printers generally work so well out-of-the-box that repairability isn't as much of a concern as it was on printers of the past. Personally I went from a Prusa MK3s to a Bambu P1P (after looking long+hard at Prusa options), and so far, no regrets. (Although I've kept the old Prusa as a 2nd printer and upgraded it to a MK3.5, but mostly just because I do enjoy a bit of tinkering with them)
- luma 8mo ago
  If your goal is to buy the cheapest machine you can find in the world, chances are good everything you buy is going to come from China. That Prusa Mk3 you bought ages ago can be upgraded to the latest model, which means you have the option of turning that device into a lifetime machine, something ONLY Prusa offers. Yes, the initial purchase price is higher, the lifetime price might not be.
  - bluescrn 8mo ago
    Last time I looked, the MK3->MK4 upgrade kit is basically the same price as a complete MK4 kit (very little can be reused. New electronics, motors, extruder) The upgrade kits are definitely a good thing, going from MK3 to MK3S to MK3.5S was a worthwhile upgrade path and has prolonged the useful life of the printer. But they have their limits. (And with 3D printing going more mainstream, there's a large segment of the market that has no interest in building printers from kits or stripping down printer to install upgrades - even though some of us find that quite enjoyable)
bmelton 8mo ago
This _cannot_ be true I'm new to 3D printing, so grains of salt abound, but since I started in on the hobby this Christmas, I've purchased four 3D printers. 3 budget-but-highly-regarded kings to start, but they all gave me tons of trouble. The Elegoo Centauri Carbon I got for Christmas that sparked this mess is a budget knockoff of the Bambu X1C, but in the first 30 days of ownership, I experienced 2 hardware failures that (thanks to having to ship parts from Mainland China) have resulted in 16 days of downtime. To deal with the downtime, I bought a stopgap Qidi Q2, but it had tons of problems -- problems which, according to the reviewers, have all been solved for. Ambiguous error messages. Poor English. Choices between "OK" and "Confirm", neither of which advanced the system. Mainboard errors. Extruder failures. Boot failures. Firmware upgrade failures. I experienced all of these within the first 3 hours of ownership, and filed for a return. I was working on a project that needed a printer, and now despite having bought a bunch of printers, I didn't have any printers that could print. Looking around locally at what I could buy that day amounted to either a Bambu P2S or a Sovol SV08. I struggled here, because I would _much_ rather be the Sovol owner than the Bambu owner, but I needed a printer, not a project, and so I decided I'd try out the Bambu until I got done with what I needed it for, and then I'd return it. But it turns out it was amazing. The others (admittedly, budget units) were loud and cantankerous, but the Bambu was only uncivilized for a few minutes of each print, and the rest of the time you barely noticed it running. The ecosystem is obviously great. Being able to monitor jobs or initiate prints from my phone is admittedly a novelty, but it's a nice one, and one that speaks to a consistency of integration. But the important part is that it just worked. There were printable upgrades available, I didn't need to print modular pieces to fix design flaws like the other units. I didn't need to move it further away to deal with the noise. I didn't need to investigate arcane error messages because none ever arose. Now, I haven't owned a Prusa, so I'm not trying to compare them. I understand that Prusa hardware quality is amazing. I believe that. I'm also wildly interested in the community efforts to implement tool-changing with INDX and INBXX, and they're the kinds of projects that I want to tinker with. But if I'm to own a Prusa, or a Sovol, or a Voron, it'll have to be as my second printer (well technically third, because I still own the Elegoo because it's too cheap to bother trying to return) because most of the time I want to print things, not tinkering with the printer. But while the Prusa machines might be amazing, the Prusa XL is wildly expensive for 5 colors, and the Core One right now can't be bought with multi-color capabilities. I'm not trying to argue against Prusa here, but the idea that only shills are into Bambu seems flatly wrong. I am ideologically opposed to how Bambu got to the market position they've reached, and for sure they've undoubtedly got a fair amount of shills in their employ but sadly, their products more than live up to the hype.
crote 8mo ago
Prusa used to be king. Their QC and customer support has gradually been getting worse. Their printers are rarely competitive feature-wise. Several printer lines are quietly being retired - with bugs remaining open for years and new features only occasionally being backported from other printers. The open-source part is mostly abandoned due to cheaper third-party clones abusing it. Don't get me wrong, I really like my Prusa printer, but in 2025 I'd have a really hard time justifying buying another one. The "Prusa premium" just doesn't seem to be worth it anymore.
JKCalhoun 8mo ago
I'm a hobbyist and price, in the end, sold me on Bambu Labs. (And I stayed once I saw the quality. Likely Prusa can match or exceed it, but not with what I was willing to lose from my wallet.)
- ebruchez 8mo ago
  Not criticizing your decision, but I went the opposite way, deciding that I was ok spending a certain extra amount initially in order to encourage a non-Chinese manufacturer. But I understand not everyone has this luxury. I bought the Core One kit to understand better how the machine works, which reduced the price delta somewhat. It remains to be seen over the long term which way is actually better financially, as Prusas have historically had long lives, while there is only limited data on the Bambu Lab side yet. So far, I am quite happy with my decision. But competition is on. I am excited about the upcoming INDX system for the Core One: if it delivers on its promise, it will be fantastic!
  - JKCalhoun 7mo ago
    In hindsight, I would have been happy to spend more if I knew the quality of what I was purchasing would be high. My Ender that I had purchased years earlier sat in the closet gathering dust because of how much of a pain it was trying to dial in the bed to level, etc. I took a second chance at 3D printing on the Bambu, but might not have if it were costly. If someone now tells me a Prusa (or whatever) is as good as and simple as the Bambu, I would not hesitate to spend even double.

by 0xedd 8mo ago

bluescrn 8mo ago

Prusa may still be king if you're using printers commercially, running them hard 24/7 in a print farm, wanting to be sure your investment has a decent lifespan with readily-available spare parts and upgrade options. But it's a premium brand now. For lighter use by hobbyists, Bambu is the clear winner on price/performance. The 'less open' downside is not a factor to most people, and the printers generally work so well out-of-the-box that repairability isn't as much of a concern as it was on printers of the past. Personally I went from a Prusa MK3s to a Bambu P1P (after looking long+hard at Prusa options), and so far, no regrets. (Although I've kept the old Prusa as a 2nd printer and upgraded it to a MK3.5, but mostly just because I do enjoy a bit of tinkering with them)

luma 8mo ago
If your goal is to buy the cheapest machine you can find in the world, chances are good everything you buy is going to come from China. That Prusa Mk3 you bought ages ago can be upgraded to the latest model, which means you have the option of turning that device into a lifetime machine, something ONLY Prusa offers. Yes, the initial purchase price is higher, the lifetime price might not be.
- bluescrn 8mo ago
  Last time I looked, the MK3->MK4 upgrade kit is basically the same price as a complete MK4 kit (very little can be reused. New electronics, motors, extruder) The upgrade kits are definitely a good thing, going from MK3 to MK3S to MK3.5S was a worthwhile upgrade path and has prolonged the useful life of the printer. But they have their limits. (And with 3D printing going more mainstream, there's a large segment of the market that has no interest in building printers from kits or stripping down printer to install upgrades - even though some of us find that quite enjoyable)

bmelton 8mo ago

This _cannot_ be true I'm new to 3D printing, so grains of salt abound, but since I started in on the hobby this Christmas, I've purchased four 3D printers. 3 budget-but-highly-regarded kings to start, but they all gave me tons of trouble. The Elegoo Centauri Carbon I got for Christmas that sparked this mess is a budget knockoff of the Bambu X1C, but in the first 30 days of ownership, I experienced 2 hardware failures that (thanks to having to ship parts from Mainland China) have resulted in 16 days of downtime. To deal with the downtime, I bought a stopgap Qidi Q2, but it had tons of problems -- problems which, according to the reviewers, have all been solved for. Ambiguous error messages. Poor English. Choices between "OK" and "Confirm", neither of which advanced the system. Mainboard errors. Extruder failures. Boot failures. Firmware upgrade failures. I experienced all of these within the first 3 hours of ownership, and filed for a return. I was working on a project that needed a printer, and now despite having bought a bunch of printers, I didn't have any printers that could print. Looking around locally at what I could buy that day amounted to either a Bambu P2S or a Sovol SV08. I struggled here, because I would _much_ rather be the Sovol owner than the Bambu owner, but I needed a printer, not a project, and so I decided I'd try out the Bambu until I got done with what I needed it for, and then I'd return it. But it turns out it was amazing. The others (admittedly, budget units) were loud and cantankerous, but the Bambu was only uncivilized for a few minutes of each print, and the rest of the time you barely noticed it running. The ecosystem is obviously great. Being able to monitor jobs or initiate prints from my phone is admittedly a novelty, but it's a nice one, and one that speaks to a consistency of integration. But the important part is that it just worked. There were printable upgrades available, I didn't need to print modular pieces to fix design flaws like the other units. I didn't need to move it further away to deal with the noise. I didn't need to investigate arcane error messages because none ever arose. Now, I haven't owned a Prusa, so I'm not trying to compare them. I understand that Prusa hardware quality is amazing. I believe that. I'm also wildly interested in the community efforts to implement tool-changing with INDX and INBXX, and they're the kinds of projects that I want to tinker with. But if I'm to own a Prusa, or a Sovol, or a Voron, it'll have to be as my second printer (well technically third, because I still own the Elegoo because it's too cheap to bother trying to return) because most of the time I want to print things, not tinkering with the printer. But while the Prusa machines might be amazing, the Prusa XL is wildly expensive for 5 colors, and the Core One right now can't be bought with multi-color capabilities. I'm not trying to argue against Prusa here, but the idea that only shills are into Bambu seems flatly wrong. I am ideologically opposed to how Bambu got to the market position they've reached, and for sure they've undoubtedly got a fair amount of shills in their employ but sadly, their products more than live up to the hype.

crote 8mo ago

Prusa used to be king. Their QC and customer support has gradually been getting worse. Their printers are rarely competitive feature-wise. Several printer lines are quietly being retired - with bugs remaining open for years and new features only occasionally being backported from other printers. The open-source part is mostly abandoned due to cheaper third-party clones abusing it. Don't get me wrong, I really like my Prusa printer, but in 2025 I'd have a really hard time justifying buying another one. The "Prusa premium" just doesn't seem to be worth it anymore.

JKCalhoun 8mo ago

I'm a hobbyist and price, in the end, sold me on Bambu Labs. (And I stayed once I saw the quality. Likely Prusa can match or exceed it, but not with what I was willing to lose from my wallet.)

ebruchez 8mo ago
Not criticizing your decision, but I went the opposite way, deciding that I was ok spending a certain extra amount initially in order to encourage a non-Chinese manufacturer. But I understand not everyone has this luxury. I bought the Core One kit to understand better how the machine works, which reduced the price delta somewhat. It remains to be seen over the long term which way is actually better financially, as Prusas have historically had long lives, while there is only limited data on the Bambu Lab side yet. So far, I am quite happy with my decision. But competition is on. I am excited about the upcoming INDX system for the Core One: if it delivers on its promise, it will be fantastic!
- JKCalhoun 7mo ago
  In hindsight, I would have been happy to spend more if I knew the quality of what I was purchasing would be high. My Ender that I had purchased years earlier sat in the closet gathering dust because of how much of a pain it was trying to dial in the bed to level, etc. I took a second chance at 3D printing on the Bambu, but might not have if it were costly. If someone now tells me a Prusa (or whatever) is as good as and simple as the Bambu, I would not hesitate to spend even double.