6 ms·
WD-40 is not really that great at anything, people buy the brand name, that's it. The formule being public probably wouldn't change much
by CAP_NET_ADMIN 8mo ago
WD-40 is not really that great at anything, people buy the brand name, that's it. The formule being public probably wouldn't change much
- OutOfHere 8mo agoIt or its variants probably contains PFAS which probably makes it hazardous to spray. Also, I suspect that breathing its ambient vapor while spraying it is is bad for the body and brain. Canola oil works in practice for basic tasks, but requires routine reapplication.
- legitster 8mo agoWD-40 classic does not contain PFAS. Which is not to say you should breath it in. > Canola oil works super well in practice without any of these risks. I cannot advise enough against using canola oil for most lubrication purposes. It's biodegradable and will break down (good for some applications) but for the most part oil breaking down is a bad thing if you want to keep something well maintained. It would gum up over time, start reacting chemically with dust or other chemicals, and potentially even cause damage. Especially if you lubricate to prevent rust. Also, in the context of breaking loose bolts, oil alone doesn't have any capacity to break up or penetrate rust.
- OneDeuxTriSeiGo 8mo agoDo not use canola oil for most lubrication tasks. You should almost always be using lithium grease. Spray on white lithium grease works for most "architectural" or furniture uses (ex: door hinges, gas springs on chairs, garage door rails and chain, etc). For anything constantly moving (ex: gearboxes or bearings) you want a more viscous lithium grease (ex: red n tacky or lucas xtra/green). But in pretty much every situation (on land) you want to be using a form of lithium grease if you want to actually keep the interface lubricated.
- OutOfHere 8mo agoThanks. Is that better than silicone?
- cluckindan 8mo agoIt is, but it also stains forever anything it touches.
- d4v3 8mo agoDepends on your use case. White lithium is better for metal on metal and silicone works better for plastic and rubber applications
- nomel 8mo ago> Canola oil works in practice for basic tasks From childhood experience, thinking all oils were the same, absolutely not. It goes rancid and gums up after some time.
- NegativeK 8mo agoI use it for two things: as a lubricant for machining aluminum and as a way to remove built up, old ass grease. But I'd still never pay for it.