6 ms·

I've long subscribed to the philosophy that you should buy the cheapest tool you can find and use safely, use it until it wears out, breaks, or your skill surpa

I've long subscribed to the philosophy that you should buy the cheapest tool you can find and use safely, use it until it wears out, breaks, or your skill surpasses the capability of the tool - and only then should you spend money on high quality tools. Too much money is thrown away in the name of "buy once, cry once" only to discover that you don't need the capabilities offered by the top of the line options.

nickthegreek 4y ago
Agreed. Buy the cheap one first. If you use it enough to break it or outgrow it, buy the best one you can then afford. So many of my tools I need just a few times a year. The harbor freight model is all I need.
Arrath 4y ago
> ..you should buy the cheapest tool you can find and use safely, use it until it wears out, breaks, or your skill surpasses the capability of the tool.. I wholeheartedly agree with this view, with one caveat. You shouldn't cheap out on certain specialty tools where failure can pose a risk of injury or damage, a suspension spring compressor is my usual example. Fortunately, purchasing an expensive one-off tool isn't your only option! They're often available for rent from local auto parts stores, to keep with my example. But yeah, besides that caveat, you'll often be better served by going with a reasonably priced tool. If you use it enough to wear it out, or break it, kudos! Time to upgrade.
legitster 4y ago
Agreed! If you are a trade professional and regularly have tools crap out on you, that's one thing. But my tools are more likely to need replacing purely out of obsolescence than anything else. And having an overbuilt tool collecting dust is just as much a waste as throwing one away occasionally.
- PaulDavisThe1st 4y ago
  > "And having an overbuilt tool collecting dust is just as much a waste as throwing one away occasionally." Is it?
  - creaturemachine 4y ago
    Yes, because a good amount of the cost of that pro level tool is R&D and support for its use by pros. By using it once and shelving it you've paid for more engineering than you need. Case in point, when I needed to drill two holes in concrete block I opted for the cheapest $20 aliexpress carbide hole saw I could find rather than the professional diamond tipped version costing hundreds. In the unlikely event that I'll need to do the same job again I could easily bang out a few more cuts with what I have or order another cheap one and still be ahead.
    - creato 4y ago
      I think this thread is conflating wasted money with wasted materials. Buying a nice tool once and underutilizing it wastes money. Buying cheap tools multiple times wastes materials.
      - PaulDavisThe1st 4y ago
        and energy. and creates waste.
      - creaturemachine 4y ago
        That underused professional tool is as much a waste as the underused cheap one, maybe more considering the upgrade in materials. And between cost and materials, it's obvious which is the most on the mind of the consumer. The aliexpress tool is already rusting sitting on the shelf and I don't care. If I had followed "the mantra" and spent hundreds I'd feel like a sucker each time I opened my tool box.
  - CoastalCoder 4y ago
    I second this question. If nothing else, there are various kinds of wastefulness: money, pollution during manufacture / delivery, landfill, opportunity costs, etc.
  - legitster 4y ago
    Nice tools are nice because they use more resources. A Milwaukee drill is physically heavier than a Ryobi of the same size - purely because of all of the upgraded components to make it more durable/longer-lasting. But if you are only touching 5% of the expected lifespan of your tool, no need to have one that's over-engineered.
roflyear 4y ago
True about some things, but there is a segment of tools where the first or second time you use it ever will be "this tool is garbage" and then you have to buy another one. It depends on the tool. Personally, I have a ton of Rigid tools. They all work really well. I replace them with Rigid if they break, actually, because my batteries work with Rigid. But, my table saw is a good table saw, because I want it to be safe, I want it to cut straight, and I want to enjoy using it. My bandsaw is a good bandsaw b/c I need something that can cut thicker wood sometimes and don't want to deal with blades breaking and popping off a cheap saw.
- gibspaulding 4y ago
  I recently inherited a much nicer table saw than the second hand Harbor Freight one I had before, and it was quite a revelation how much easier it was to get good results with it and how much safer it feels to use. I'd definitely agree on that one. The other category where I like to spend more is tools I hate to use. Some things I have specifically for jobs that suck and anything that makes those jobs easier is worth it in my mind. I have a nice drain snake, and the most expensive toilet plunger I could find for this reason.
  - roflyear 4y ago
    A good table saw basically does the project for you, it is amazing.
dbg31415 4y ago
I guess... what you're saying is not bad advice. Maybe instead, aim to buy tools as cheaply as you can the first time. I think it's best to just get your tools as gifts, or from garage sales. But there are a lot of tools that are cheap, feel cheap, and will break on you. Avoid using cheaply made tools -- this is also good advice. A neighbor bought a table saw with really flimsy legs... and the whole things just shook when you put boards through it. Look, you don't want to use a table saw like that. For... all the common sense reasons. Plus, with gifts at least, it's nice knowing my grandfather used the same socket set I have now. Emotionally-nice, and quality-nice... I know they aren't going to break on me since they didn't break on him.
- ekidd 4y ago
  > Look, you don't want to use a table saw like that. For... all the common sense reasons. For example, you might have an increased risk of wood kickback, very nearly lose a leg, and spend years in physical therapy trying to replace the muscle mass that died. (I knew a guy.) Or you might bleed out. Seriously, a few extra safety features on a table saw can make the difference between life and death. Assuming you don't just disable them. (I have a cheapish table saw, but one that isn't complete garbage. I treat it with about the same caution I'd treat unexploded ordnance from World War II.)
  - dbg31415 4y ago
    > I have a cheapish table saw, but one that isn't complete garbage. I treat it with about the same caution I'd treat unexploded ordnance from World War II. For good reason! https://duckduckgo.com/?q=table+saw+accident&t=ffab&iar=images&iax=images&ia=images https://duckduckgo.com/?q=table+saw+accident&t=ffab&iar=imag...
cjensen 4y ago
There is also a safety concern with overly cheap tools. For an example, the adjustable wrench in this article. What happens when you apply a lot of force on a stubborn nut? If the wrench experiences rapid unscheduled disassembly, you now have broken pieces flying in random directions. In the US, the thing that most prevents this from being a problem is the threat of liability lawsuits. That doesn't apply to a tool made by a small company in China and sold by a fly-by-night outfit on Amazon's marketplace. I'm guessing Amazon is unknowingly the liable party here, but I'm not a lawyer.
- xd 4y ago
  Biggest worry would be smashing your knuckles on something when it gives up not the thing exploding.
- LeifCarrotson 4y ago
  What's going to happen is that the nut will round over, because there's little in this design to prevent the jaw back-driving the helix. Having used a lot of adjustable wrenches, and rounded over quite a few bolts, now I keep sets of open-end wrenches in reach on the toolbench and for adjustables I carry exclusively Knipex Pliers Wrenches, which are awesome tools. There's no way you're breaking the casting of the wrench without a big cheater bar, which I admit to having used...while wearing safety glasses.
  - sliken 4y ago
    Knipex are awesome, a good example of quality resulting in a tool that lasts much longer than the cheap tools and causing much less damage to the nuts you are working on.
not_the_fda 4y ago
I strongly disagree. Cheap tools are a pain to use, and break when you need them most, and perpetuate throw away culture. If a good tool is too expensive to own find a rental or buy used, otherwise buy high quality. High quality is a joy to work with and will serve you a long time.
- darksaints 4y ago
  I've been burned repeatedly by your philosophy. It only seems to hold if you know exactly what you want. I've got closets littered with high quality things that I don't ever use anymore because I lost interest before I could ever appreciate its quality.
  - CoastalCoder 4y ago
    Not detracting from your point, but maybe sell them on Craigslist?
    - darksaints 4y ago
      Selling them is a pain of its own. I would have preferred to have bought cheap and not have to worry about recuperating value. I think people get it into their heads that they need to be a buy cheap or buy quality person entirely, and I think the most succinct point I could make is that it doesn't have to be one extreme or the other. Buy quality for the things where you know what you want and value the quality improvement, and buy cheap for the things that are new and unknown to you. You don't need a pro-quality snowboard before you decide that you like snowboarding.
- animal_spirits 4y ago
  I follow this sentiment. Buy nice or buy twice
  - Rebelgecko 4y ago
    For me it's more of a pareto thing. 90% of the time, the Harbor Freight tool is gonna do the job. Even if I end up needing to buy a more expensive tool 10% of the time, I'm still coming out ahead. YMMV depending on how often you need to use various tools or if you're buying jack stands (or anything else where failure could lead to death/injury)
PaulDavisThe1st 4y ago
This has been my mantra: "There have been 3 great joys in my life: sex, food and music. Of these music has proved the most reliable." but your comment makes me want to revise it: "There have been 4 great joys in my life: sex, food, music and good tools, and of these, music and good tools have competed fairly to be the most reliable."
- quercusa 4y ago
  I have several Estwing hand tools that never fail to delight me when using them.
JKCalhoun 4y ago
And yet... The free tools that come included with that 3D printer you just bought will slip and ruin at least one of the hex nuts holding the FEP to the vat and you will have to spend nearly $100 for a new vat when you could have instead spent $45 on a set of Wera hex tools, not trashed the hex screw, and have a damn nice set of hex tools forever. (And your bike will thank you as well.)
- slingnow 4y ago
  Where exactly did OP advocate for using free tools that come included with your new [3D Printer / Furniture / etc]? Also, anecdotally after 30+ years of using the free tools that come included with [whatever], I have never once ruined any of the hardware. The saying goes that a poor craftsman blames his tools, and that seems apt here.
oflannabhra 4y ago
I mostly follow this, with the additional criteria of how often the tool will be used affecting the level of quality of my initial purchase. “Buy once, cry once” is basically the opposite of your philosophy, and my personal philosophy lies somewhere in the middle.
rob74 4y ago
> I've long subscribed to the philosophy that you should buy the cheapest tool you can find and use safely [...] Too much money is thrown away in the name of "buy once, cry once" only to discover that you don't need the capabilities offered by the top of the line options. How about something in between these two extremes? You don't need to go "top of the line", but you can save yourself a lot of frustration if you spend a little more than the absolute minimum...
soared 4y ago
Until you use a cheap tool on your expensive bike, the allowance on the tool is poor and strips a screw, which can only be custom ordered direct from the manufacturer with a 2 month lead time, leaving your half-fixed bike completely useless. This happened to me when bleeding my hydraulic brakes - the screw was a 2.5mm Allen and my keys were slightly smaller than 2.5 from being rounded over a short period of time. That rounded the screw, and my choice was to leave my brakes without fluid.. or drill out the screw!
- marcus0x62 4y ago
  Allen fasteners are bad, and the people who designed them should feel bad. Even relatively high quality allen wrenches are prone to stripping fasteners. The best option on the market is the MAC RBRT series[1] 1 - https://www.mactools.com/products/sbdb77rbrt https://www.mactools.com/products/sbdb77rbrt
  - fn-mote 4y ago
    For the not-so-curious: $180
- johnwalkr 4y ago
  I keep a handful of left-handed drill bits on hand for drilling out screws. You can get them cheaply from mcmaster. They work much better than "Easy-outs" and similar tools, and 90% of the time the fastener backs out well before you reach the point where you have to hope you're not damaging anything but the screw.
ekidd 4y ago
> I've long subscribed to the philosophy that you should buy the cheapest tool you can find and use safely, use it until it wears out, breaks, or your skill surpasses the capability of the tool - and only then should you spend money on high quality tools. Overall, it's not a bad philosophy. But I can think of a couple of complications here: - For battery-operated tools, standardizing on one system means you can buy a handful of pricy batteries and share them among many tools. Batteries wear out, and eventually need repeated replacement. And only needing to replace, say, 3 batteries from a single brand is convenient. - A lot of times, it's possible to buy medium-quality tool sets (say, hex wrenches) for less than $100. I'm literally going to use many of them as long as I live. Why not spend $70 and get something halfway decent, instead of the $30 junk? - If you're doing a big project (refinishing kitchen cabinets, building a deck, etc), that can easily justify spending a few hundred dollars on a quality key tool. A quality drill/hammer driver pair is game changing, for example. Saves countless hours compared to my old gear. I had Craftsman power tools until battery replacements were only available from fly-by-night companies and a couple of the tools started failing (after 20 years). I wound up buying a couple of DeWalt tools on sale and they've been rock-solid. So I added a couple more as needed. I tried a Ryobi line trimmer a few years ago, and the battery system failed within two weeks. So I took it back and paid $50 extra for a DeWalt version that has run flawlessly. I could save some money by buying less-used tools from a second, cheaper brand. But that would double my battery replacement costs over the next 20 years, and I'd need to do more research for each purchase. So sometimes a set of "79 auto tools for one low price!" is a good move. And sometimes, mid-to-high end homeowner gear or even a contractor tool is worth the money.
- Eduardo3rd 4y ago
  'I had Craftsman power tools until battery replacements were only available from fly-by-night companies and a couple of the tools started failing (after 20 years). I wound up buying a couple of DeWalt tools on sale and they've been rock-solid. So I added a couple more as needed.' I think we are in complete agreement! After 20 years of use are are more than qualified to know what you need and go get it regardless of the price point!
kennend3 4y ago
I agree with your general position. here's where things get really interesting , who really makes these tools in the first place? https://www.protoolreviews.com/power-tool-manufacturers-who-owns-them/ https://www.protoolreviews.com/power-tool-manufacturers-who-... I find that "tools" develop the same sort of things we see in tech (brand love like this endless apple vs android thing). but when you look at the chart of who actually makes these things.. it sort of falls apart. Like "rigid", "Milwaukee" and the terrible Cryobi are all TTI? Obviously built to different specs/price points but it is interesting to see one "brand" targeting all markets?
jjeaff 4y ago
I have two exception for the buy it cheap rule. I first look for a high quality option being sold used. Sometimes you can get the better option for cheaper. This is of course only worth the time on more expensive stuff. Then, I also have started getting the one step up from the cheapest option. A lot of times that seems to be a better buy these days.
constantcrying 4y ago
>I've long subscribed to the philosophy that you should buy the cheapest tool you can find and use safely, use it until it wears out, breaks, or your skill surpasses the capability of the tool For a sufficiently cheap tool that might be instantaneously and the difference can be very hard to tell. I think that you should spend money according to what you are comfortable with and what you actually have a use for. >Too much money is thrown away in the name of "buy once, cry once" only to discover that you don't need the capabilities offered by the top of the line options. I would say too many products are made and thrown away because people discovered that they were too badly made to use them.
johnwalkr 4y ago
I follow this for things I truly will need occasionally, like most specialized car repair tools. But my exceptions are things I know I will use regularly. In addition to not replacing things as they wear out, my reasoning is that it's nice to have a set of each type of tool, with a storage case instead of ending up with a large mix of tools. Of course, someone else might have a different list of regularly used tools and some of the following list is from trial and error, I didn't get all of these right the first time. - Screwdrivers: I have 2 Wera sets with many bits (small and large). They come with nice fabric/velcro carrying cases that are perfect for throwing in a bag, car, or drawer. High quality and the packaging is worth it compared to something loose or in a plastic case. I also have one full set of non-configurable Vessel screwdrivers that stays in my work area. They are a wooden composite, feel professional but are not much more than crafstman prices.[2] - Wire strippers, side cutters, adjustable wrenches, pliers, etc: These really depend on material properties and tight tolerance, and it's worth buying quality. I like Knipex and engineer brands. - Sockets and non-adjustable wrenches: These tend to be sold in large sets at sale prices and at various qualities. Unless you're a mechanic you can probably go into any hardware store, do a quick google search for complaints, and buy the cheapest set of sockets and wrenches. Don't pay for "200 pieces" including crappy little 1/4" bits and crappy screwdrivers in a giant blow-molded case that will annoy you later. Bonus points if you can find a small, nice case filled with actually useful sizes (probably <18mm and/or 3/4"). - Ratcheting screwdrivers: don't buy one unless you really find you need one for some reason. If you do buy one, it will either be useless or expensive. - Drill bits: buy house brand from an industrial supply shop or mcmaster. Make sure it's easy and cheap to replace individual sizes. - Battery-powered tools: Pick something like DeWalt, Bosch, Milwaukee or Hitachi/Hikoki[2,3] (the name of this one varies wildly with region) with a full range of tools and good reputation - Soldering iron: You probably don't need more power than a pinecil which is usb-c and super-portable.[4] Plus it's got RISC-V cred. It's so convenient to unplug my laptop for 30 minutes and plug this in, or plug into a usb-c battery. For benchtop, a "Hakko clone" that takes abundant and great TS12 tips is good. To be honest I never touch my clone or my much more expensive but heavy actual Hakko soldering station since I got the pinecil. Both pinecil and the clone similar price to a piece of crap with poor temperature control from the hardware store. [1]https://www.vesseltoolsusa.com/product/screwdriver/detail/VTU3006CS https://www.vesseltoolsusa.com/product/screwdriver/detail/VT... [2]I chose Hikoki because I move around and it's available globally, and because it has excellent but pretty inexpensive vacuum cleaners that use the same batteries as the power tools. [3]https://www.powertoolworld.co.uk/hikoki-r36daw4z-36v-cordless-brushless-vacuum-cleaner-body-only https://www.powertoolworld.co.uk/hikoki-r36daw4z-36v-cordles... [4]https://pine64.com/product/pinecil-smart-mini-portable-soldering-iron/ https://pine64.com/product/pinecil-smart-mini-portable-solde...

nickthegreek 4y ago

Agreed. Buy the cheap one first. If you use it enough to break it or outgrow it, buy the best one you can then afford. So many of my tools I need just a few times a year. The harbor freight model is all I need.

Arrath 4y ago

> ..you should buy the cheapest tool you can find and use safely, use it until it wears out, breaks, or your skill surpasses the capability of the tool.. I wholeheartedly agree with this view, with one caveat. You shouldn't cheap out on certain specialty tools where failure can pose a risk of injury or damage, a suspension spring compressor is my usual example. Fortunately, purchasing an expensive one-off tool isn't your only option! They're often available for rent from local auto parts stores, to keep with my example. But yeah, besides that caveat, you'll often be better served by going with a reasonably priced tool. If you use it enough to wear it out, or break it, kudos! Time to upgrade.

legitster 4y ago

Agreed! If you are a trade professional and regularly have tools crap out on you, that's one thing. But my tools are more likely to need replacing purely out of obsolescence than anything else. And having an overbuilt tool collecting dust is just as much a waste as throwing one away occasionally.

PaulDavisThe1st 4y ago
> "And having an overbuilt tool collecting dust is just as much a waste as throwing one away occasionally." Is it?
- creaturemachine 4y ago
  Yes, because a good amount of the cost of that pro level tool is R&D and support for its use by pros. By using it once and shelving it you've paid for more engineering than you need. Case in point, when I needed to drill two holes in concrete block I opted for the cheapest $20 aliexpress carbide hole saw I could find rather than the professional diamond tipped version costing hundreds. In the unlikely event that I'll need to do the same job again I could easily bang out a few more cuts with what I have or order another cheap one and still be ahead.
  - creato 4y ago
    I think this thread is conflating wasted money with wasted materials. Buying a nice tool once and underutilizing it wastes money. Buying cheap tools multiple times wastes materials.
    - PaulDavisThe1st 4y ago
      and energy. and creates waste.
    - creaturemachine 4y ago
      That underused professional tool is as much a waste as the underused cheap one, maybe more considering the upgrade in materials. And between cost and materials, it's obvious which is the most on the mind of the consumer. The aliexpress tool is already rusting sitting on the shelf and I don't care. If I had followed "the mantra" and spent hundreds I'd feel like a sucker each time I opened my tool box.
- CoastalCoder 4y ago
  I second this question. If nothing else, there are various kinds of wastefulness: money, pollution during manufacture / delivery, landfill, opportunity costs, etc.
- legitster 4y ago
  Nice tools are nice because they use more resources. A Milwaukee drill is physically heavier than a Ryobi of the same size - purely because of all of the upgraded components to make it more durable/longer-lasting. But if you are only touching 5% of the expected lifespan of your tool, no need to have one that's over-engineered.

roflyear 4y ago

True about some things, but there is a segment of tools where the first or second time you use it ever will be "this tool is garbage" and then you have to buy another one. It depends on the tool. Personally, I have a ton of Rigid tools. They all work really well. I replace them with Rigid if they break, actually, because my batteries work with Rigid. But, my table saw is a good table saw, because I want it to be safe, I want it to cut straight, and I want to enjoy using it. My bandsaw is a good bandsaw b/c I need something that can cut thicker wood sometimes and don't want to deal with blades breaking and popping off a cheap saw.

gibspaulding 4y ago
I recently inherited a much nicer table saw than the second hand Harbor Freight one I had before, and it was quite a revelation how much easier it was to get good results with it and how much safer it feels to use. I'd definitely agree on that one. The other category where I like to spend more is tools I hate to use. Some things I have specifically for jobs that suck and anything that makes those jobs easier is worth it in my mind. I have a nice drain snake, and the most expensive toilet plunger I could find for this reason.
- roflyear 4y ago
  A good table saw basically does the project for you, it is amazing.

dbg31415 4y ago

I guess... what you're saying is not bad advice. Maybe instead, aim to buy tools as cheaply as you can the first time. I think it's best to just get your tools as gifts, or from garage sales. But there are a lot of tools that are cheap, feel cheap, and will break on you. Avoid using cheaply made tools -- this is also good advice. A neighbor bought a table saw with really flimsy legs... and the whole things just shook when you put boards through it. Look, you don't want to use a table saw like that. For... all the common sense reasons. Plus, with gifts at least, it's nice knowing my grandfather used the same socket set I have now. Emotionally-nice, and quality-nice... I know they aren't going to break on me since they didn't break on him.

ekidd 4y ago
> Look, you don't want to use a table saw like that. For... all the common sense reasons. For example, you might have an increased risk of wood kickback, very nearly lose a leg, and spend years in physical therapy trying to replace the muscle mass that died. (I knew a guy.) Or you might bleed out. Seriously, a few extra safety features on a table saw can make the difference between life and death. Assuming you don't just disable them. (I have a cheapish table saw, but one that isn't complete garbage. I treat it with about the same caution I'd treat unexploded ordnance from World War II.)
- dbg31415 4y ago
  > I have a cheapish table saw, but one that isn't complete garbage. I treat it with about the same caution I'd treat unexploded ordnance from World War II. For good reason! https://duckduckgo.com/?q=table+saw+accident&t=ffab&iar=images&iax=images&ia=images https://duckduckgo.com/?q=table+saw+accident&t=ffab&iar=imag...

cjensen 4y ago

There is also a safety concern with overly cheap tools. For an example, the adjustable wrench in this article. What happens when you apply a lot of force on a stubborn nut? If the wrench experiences rapid unscheduled disassembly, you now have broken pieces flying in random directions. In the US, the thing that most prevents this from being a problem is the threat of liability lawsuits. That doesn't apply to a tool made by a small company in China and sold by a fly-by-night outfit on Amazon's marketplace. I'm guessing Amazon is unknowingly the liable party here, but I'm not a lawyer.

xd 4y ago
Biggest worry would be smashing your knuckles on something when it gives up not the thing exploding.
LeifCarrotson 4y ago
What's going to happen is that the nut will round over, because there's little in this design to prevent the jaw back-driving the helix. Having used a lot of adjustable wrenches, and rounded over quite a few bolts, now I keep sets of open-end wrenches in reach on the toolbench and for adjustables I carry exclusively Knipex Pliers Wrenches, which are awesome tools. There's no way you're breaking the casting of the wrench without a big cheater bar, which I admit to having used...while wearing safety glasses.
- sliken 4y ago
  Knipex are awesome, a good example of quality resulting in a tool that lasts much longer than the cheap tools and causing much less damage to the nuts you are working on.

not_the_fda 4y ago

I strongly disagree. Cheap tools are a pain to use, and break when you need them most, and perpetuate throw away culture. If a good tool is too expensive to own find a rental or buy used, otherwise buy high quality. High quality is a joy to work with and will serve you a long time.

darksaints 4y ago
I've been burned repeatedly by your philosophy. It only seems to hold if you know exactly what you want. I've got closets littered with high quality things that I don't ever use anymore because I lost interest before I could ever appreciate its quality.
- CoastalCoder 4y ago
  Not detracting from your point, but maybe sell them on Craigslist?
  - darksaints 4y ago
    Selling them is a pain of its own. I would have preferred to have bought cheap and not have to worry about recuperating value. I think people get it into their heads that they need to be a buy cheap or buy quality person entirely, and I think the most succinct point I could make is that it doesn't have to be one extreme or the other. Buy quality for the things where you know what you want and value the quality improvement, and buy cheap for the things that are new and unknown to you. You don't need a pro-quality snowboard before you decide that you like snowboarding.
animal_spirits 4y ago
I follow this sentiment. Buy nice or buy twice
- Rebelgecko 4y ago
  For me it's more of a pareto thing. 90% of the time, the Harbor Freight tool is gonna do the job. Even if I end up needing to buy a more expensive tool 10% of the time, I'm still coming out ahead. YMMV depending on how often you need to use various tools or if you're buying jack stands (or anything else where failure could lead to death/injury)

PaulDavisThe1st 4y ago

This has been my mantra: "There have been 3 great joys in my life: sex, food and music. Of these music has proved the most reliable." but your comment makes me want to revise it: "There have been 4 great joys in my life: sex, food, music and good tools, and of these, music and good tools have competed fairly to be the most reliable."

quercusa 4y ago
I have several Estwing hand tools that never fail to delight me when using them.

JKCalhoun 4y ago

And yet... The free tools that come included with that 3D printer you just bought will slip and ruin at least one of the hex nuts holding the FEP to the vat and you will have to spend nearly $100 for a new vat when you could have instead spent $45 on a set of Wera hex tools, not trashed the hex screw, and have a damn nice set of hex tools forever. (And your bike will thank you as well.)

slingnow 4y ago
Where exactly did OP advocate for using free tools that come included with your new [3D Printer / Furniture / etc]? Also, anecdotally after 30+ years of using the free tools that come included with [whatever], I have never once ruined any of the hardware. The saying goes that a poor craftsman blames his tools, and that seems apt here.

oflannabhra 4y ago

I mostly follow this, with the additional criteria of how often the tool will be used affecting the level of quality of my initial purchase. “Buy once, cry once” is basically the opposite of your philosophy, and my personal philosophy lies somewhere in the middle.

rob74 4y ago

> I've long subscribed to the philosophy that you should buy the cheapest tool you can find and use safely [...] Too much money is thrown away in the name of "buy once, cry once" only to discover that you don't need the capabilities offered by the top of the line options. How about something in between these two extremes? You don't need to go "top of the line", but you can save yourself a lot of frustration if you spend a little more than the absolute minimum...

soared 4y ago

Until you use a cheap tool on your expensive bike, the allowance on the tool is poor and strips a screw, which can only be custom ordered direct from the manufacturer with a 2 month lead time, leaving your half-fixed bike completely useless. This happened to me when bleeding my hydraulic brakes - the screw was a 2.5mm Allen and my keys were slightly smaller than 2.5 from being rounded over a short period of time. That rounded the screw, and my choice was to leave my brakes without fluid.. or drill out the screw!

marcus0x62 4y ago
Allen fasteners are bad, and the people who designed them should feel bad. Even relatively high quality allen wrenches are prone to stripping fasteners. The best option on the market is the MAC RBRT series[1] 1 - https://www.mactools.com/products/sbdb77rbrt https://www.mactools.com/products/sbdb77rbrt
- fn-mote 4y ago
  For the not-so-curious: $180
johnwalkr 4y ago
I keep a handful of left-handed drill bits on hand for drilling out screws. You can get them cheaply from mcmaster. They work much better than "Easy-outs" and similar tools, and 90% of the time the fastener backs out well before you reach the point where you have to hope you're not damaging anything but the screw.

ekidd 4y ago

> I've long subscribed to the philosophy that you should buy the cheapest tool you can find and use safely, use it until it wears out, breaks, or your skill surpasses the capability of the tool - and only then should you spend money on high quality tools. Overall, it's not a bad philosophy. But I can think of a couple of complications here: - For battery-operated tools, standardizing on one system means you can buy a handful of pricy batteries and share them among many tools. Batteries wear out, and eventually need repeated replacement. And only needing to replace, say, 3 batteries from a single brand is convenient. - A lot of times, it's possible to buy medium-quality tool sets (say, hex wrenches) for less than $100. I'm literally going to use many of them as long as I live. Why not spend $70 and get something halfway decent, instead of the $30 junk? - If you're doing a big project (refinishing kitchen cabinets, building a deck, etc), that can easily justify spending a few hundred dollars on a quality key tool. A quality drill/hammer driver pair is game changing, for example. Saves countless hours compared to my old gear. I had Craftsman power tools until battery replacements were only available from fly-by-night companies and a couple of the tools started failing (after 20 years). I wound up buying a couple of DeWalt tools on sale and they've been rock-solid. So I added a couple more as needed. I tried a Ryobi line trimmer a few years ago, and the battery system failed within two weeks. So I took it back and paid $50 extra for a DeWalt version that has run flawlessly. I could save some money by buying less-used tools from a second, cheaper brand. But that would double my battery replacement costs over the next 20 years, and I'd need to do more research for each purchase. So sometimes a set of "79 auto tools for one low price!" is a good move. And sometimes, mid-to-high end homeowner gear or even a contractor tool is worth the money.

Eduardo3rd 4y ago
'I had Craftsman power tools until battery replacements were only available from fly-by-night companies and a couple of the tools started failing (after 20 years). I wound up buying a couple of DeWalt tools on sale and they've been rock-solid. So I added a couple more as needed.' I think we are in complete agreement! After 20 years of use are are more than qualified to know what you need and go get it regardless of the price point!

kennend3 4y ago

I agree with your general position. here's where things get really interesting , who really makes these tools in the first place? https://www.protoolreviews.com/power-tool-manufacturers-who-owns-them/ https://www.protoolreviews.com/power-tool-manufacturers-who-... I find that "tools" develop the same sort of things we see in tech (brand love like this endless apple vs android thing). but when you look at the chart of who actually makes these things.. it sort of falls apart. Like "rigid", "Milwaukee" and the terrible Cryobi are all TTI? Obviously built to different specs/price points but it is interesting to see one "brand" targeting all markets?

jjeaff 4y ago

I have two exception for the buy it cheap rule. I first look for a high quality option being sold used. Sometimes you can get the better option for cheaper. This is of course only worth the time on more expensive stuff. Then, I also have started getting the one step up from the cheapest option. A lot of times that seems to be a better buy these days.

constantcrying 4y ago

>I've long subscribed to the philosophy that you should buy the cheapest tool you can find and use safely, use it until it wears out, breaks, or your skill surpasses the capability of the tool For a sufficiently cheap tool that might be instantaneously and the difference can be very hard to tell. I think that you should spend money according to what you are comfortable with and what you actually have a use for. >Too much money is thrown away in the name of "buy once, cry once" only to discover that you don't need the capabilities offered by the top of the line options. I would say too many products are made and thrown away because people discovered that they were too badly made to use them.

johnwalkr 4y ago

I follow this for things I truly will need occasionally, like most specialized car repair tools. But my exceptions are things I know I will use regularly. In addition to not replacing things as they wear out, my reasoning is that it's nice to have a set of each type of tool, with a storage case instead of ending up with a large mix of tools. Of course, someone else might have a different list of regularly used tools and some of the following list is from trial and error, I didn't get all of these right the first time. - Screwdrivers: I have 2 Wera sets with many bits (small and large). They come with nice fabric/velcro carrying cases that are perfect for throwing in a bag, car, or drawer. High quality and the packaging is worth it compared to something loose or in a plastic case. I also have one full set of non-configurable Vessel screwdrivers that stays in my work area. They are a wooden composite, feel professional but are not much more than crafstman prices.[2] - Wire strippers, side cutters, adjustable wrenches, pliers, etc: These really depend on material properties and tight tolerance, and it's worth buying quality. I like Knipex and engineer brands. - Sockets and non-adjustable wrenches: These tend to be sold in large sets at sale prices and at various qualities. Unless you're a mechanic you can probably go into any hardware store, do a quick google search for complaints, and buy the cheapest set of sockets and wrenches. Don't pay for "200 pieces" including crappy little 1/4" bits and crappy screwdrivers in a giant blow-molded case that will annoy you later. Bonus points if you can find a small, nice case filled with actually useful sizes (probably <18mm and/or 3/4"). - Ratcheting screwdrivers: don't buy one unless you really find you need one for some reason. If you do buy one, it will either be useless or expensive. - Drill bits: buy house brand from an industrial supply shop or mcmaster. Make sure it's easy and cheap to replace individual sizes. - Battery-powered tools: Pick something like DeWalt, Bosch, Milwaukee or Hitachi/Hikoki[2,3] (the name of this one varies wildly with region) with a full range of tools and good reputation - Soldering iron: You probably don't need more power than a pinecil which is usb-c and super-portable.[4] Plus it's got RISC-V cred. It's so convenient to unplug my laptop for 30 minutes and plug this in, or plug into a usb-c battery. For benchtop, a "Hakko clone" that takes abundant and great TS12 tips is good. To be honest I never touch my clone or my much more expensive but heavy actual Hakko soldering station since I got the pinecil. Both pinecil and the clone similar price to a piece of crap with poor temperature control from the hardware store. [1]https://www.vesseltoolsusa.com/product/screwdriver/detail/VTU3006CS https://www.vesseltoolsusa.com/product/screwdriver/detail/VT... [2]I chose Hikoki because I move around and it's available globally, and because it has excellent but pretty inexpensive vacuum cleaners that use the same batteries as the power tools. [3]https://www.powertoolworld.co.uk/hikoki-r36daw4z-36v-cordless-brushless-vacuum-cleaner-body-only https://www.powertoolworld.co.uk/hikoki-r36daw4z-36v-cordles... [4]https://pine64.com/product/pinecil-smart-mini-portable-soldering-iron/ https://pine64.com/product/pinecil-smart-mini-portable-solde...