8 ms·

Absolutely agree. The lack of LiDAR (or equiv) seems to really hamper iRobot's effectiveness - I had an iRobot i7 and its mapping/pathfinding was ramming in to

Absolutely agree. The lack of LiDAR (or equiv) seems to really hamper iRobot's effectiveness - I had an iRobot i7 and its mapping/pathfinding was ramming in to things at near top speed and ricocheting off the walls. They also still sell vacuum and mopping* robots as seperate units which just drives up the cost. My old setup of the two robots took somewhere on the order of 5-6 hours to do a ~100m2 apartment. I moved to a Roborock and then Dreame bot (someone really needs to talk to Xiaomi about all the sub-brands :P) comparitively, they both took around 1.5 to just under 2 hours to do a much better job. I actually felt huge guilt selling my two iRobot's to someone, wanting to tell them they were complete junk and they were wasting their money. *There is always mixed opinions on mopping effectiveness, but the iRobot roll-and-spit model of mopping is truly horrendous.

ixs 4y ago
Based on the comments here I did a quick look at Amazon and was surprised to not even see a single vacuum only robot from Evovacs. At least not prominently showcased. Why are there only mixed models and what are the benefits? If I look at my place the ground floor is tiled and the top floor is all carpet. That means I would need two vacuums anyway as they haven’t learned yet to climb stairs. Why wouldn’t I want a vacuum only model for upstairs? For downstairs the universal model is great obviously. But upstairs?
- resonanttoe 4y ago
  I know there were a lot of simple vac only bots in the roborock line up. S5 and similar the mopping funciton is a small pad that you manually wet and it drags along behind. It kind of sucks but if you were in the market for just a vacuum, you remove the bracket and it's fine. The robot has no knowledge of the mop as there isn't a tank. The S6Max that has a tank, you can also remove (easily, two button clips) and it'll not attempt any mopping feature. It also supposedly doesn't squirt water on to the pad when it knows its on carpet, but at some stage you may be dragging a mildly damp cloth on to the carpet. (was never an issue for me, the pad was never that wet that you could reasonably detect it on the carpet) Overall mopping with drag-behind pads is pretty... opportunistic? Its not great and you'll be in a position where you have to manually mop. Many models are switching to the spinning buffer pads which is a much better solution (that's the Dreame W10) but it refuses to do carpet. So its always a matter of finding a model that fits your use case. >That means I would need two vacuums anyway as they haven’t learned yet to climb stairs. Many allow for multi floor mapping on a single bot, but stairs will always be a problem for the Daleks. :P
  - KptMarchewa 4y ago
    S5 works the same like you describe S6Max, maybe you're thinking about some older one.
nerdjon 4y ago
I don't understand this, I had a Neato before I switched to iRobot and the lidar just seemed to be the worst idea for a home environment. On an almost weekly basis it would fail to start because it would think it was moved if something just moved a little bit nearby or a cat just happened to be sleeping nearby. This generally forced me to remap Then it would constantly get lost and be confused about what room it was in. Seemingly for the same reasons of things moving around. A home isn't a static environment and a camera just seems much more efficient. Not that a camera is perfect, but at least a camera can account for things moving around were lidar cannot. Or was this a case of Neato just not being good? The lidar issues was why I went with iRobot. It was a worse vacuum but if it actually works consistently than I can just have it run more often.
- moepstar 4y ago
  I've a Xiami / Roborock S5 for almost 5 years now (give or take a few months) and their LIDAR implementation is absolutely genius - no issues whatsoever, no matter what gets moved around or not... Must've been Neatos implementation i suppose... On top of the really top-notch LIDAR the S5 is beautifully engineered as well - basically everything is a module (i.e. wheel+motor) which is plugged in and secured with a few screws - really good repairability and also spares are available (needed so far: 1 LIDAR motor, 2,50€; 1 resettable fuse for charging).
  - KptMarchewa 4y ago
    I would not complement S5 that much. Mine can never return to the dock alone, which is pretty basic - it knows where it is, but tries to move there from a weird angle, repeats this few times and ultimately loudly fails. Also, it always gets stuck on dryer rack. The engineering on the modularity is neat though, I agree.
    - moepstar 4y ago
      Hm, that's strange - i've even used mine in 2 apartments now, on 4 floors no less.. No issues whatsoever - on the floor where there is no dock it just goes back to the point you dropped it off and started cleaning... > Also, it always gets stuck on dryer rack. Have you tried to put some magnetic tape (barrier) on to the legs?
thatfrenchguy 4y ago
> My old setup of the two robots took somewhere on the order of 5-6 hours to do a ~100m2 apartment I mean, yes, the first time, but my i7 takes like 2 hours to do my ~140sqm apartment?
jsmith45 4y ago
I've felt that the iRobot mapping was acceptable. Once my i7 has generated a proper map, it will will slow down when it approaches known walls, or even places where obstacles have been several times in the past. It will need to bump into the obsticle or wall to confirm its position though. It does use a mostly predictable back and forth pattern, taking note of areas with walls/obstacles, and after the main sweeping it will combe back to go around the obstacles, and finally (optional) do a sweep of the walls. Then it moves onto the next room. The system does have limitations. For example, if it needs assistance in the middle of a clean job, after you fix it, there is a reasonable chance that it will do dumb stuff afterwards, like missing a large section of floor. (It seems to even know this, but have problematic coding that prevents it from doing the right thing). But yeah, I'd not call the mapping good, just acceptable. There are other annoyances like the i7 battery being so small, especially since they have a giant battery compartment. Like seriously big enough like ni-cad batteries battery of equivalent capacity. But they only offer a slightly larger capacity battery as part of their Costco exclusive model, and try to lock out third party batteries. The net result is that even when brand new, it could not quite do a single floor of my house in one go, needing to go recharge for like 40 minutes before it could do the last 10 minutes of cleaning. The app is not very good. It does not even do some basic things like prompt the user for regular maintenance periodically based on number of hours used. The floor maps in the app are weird. For example, on one of my floors, the online map decided that the entrance to one of my rooms was on a completely different wall from where the entrance really was. It thought the actual door was just a wall. However the actually mapping data on the robot was just fine. It knew where the door really was, and never tried to drive though the wall where the online map though the door was.

ixs 4y ago

Based on the comments here I did a quick look at Amazon and was surprised to not even see a single vacuum only robot from Evovacs. At least not prominently showcased. Why are there only mixed models and what are the benefits? If I look at my place the ground floor is tiled and the top floor is all carpet. That means I would need two vacuums anyway as they haven’t learned yet to climb stairs. Why wouldn’t I want a vacuum only model for upstairs? For downstairs the universal model is great obviously. But upstairs?

resonanttoe 4y ago
I know there were a lot of simple vac only bots in the roborock line up. S5 and similar the mopping funciton is a small pad that you manually wet and it drags along behind. It kind of sucks but if you were in the market for just a vacuum, you remove the bracket and it's fine. The robot has no knowledge of the mop as there isn't a tank. The S6Max that has a tank, you can also remove (easily, two button clips) and it'll not attempt any mopping feature. It also supposedly doesn't squirt water on to the pad when it knows its on carpet, but at some stage you may be dragging a mildly damp cloth on to the carpet. (was never an issue for me, the pad was never that wet that you could reasonably detect it on the carpet) Overall mopping with drag-behind pads is pretty... opportunistic? Its not great and you'll be in a position where you have to manually mop. Many models are switching to the spinning buffer pads which is a much better solution (that's the Dreame W10) but it refuses to do carpet. So its always a matter of finding a model that fits your use case. >That means I would need two vacuums anyway as they haven’t learned yet to climb stairs. Many allow for multi floor mapping on a single bot, but stairs will always be a problem for the Daleks. :P
- KptMarchewa 4y ago
  S5 works the same like you describe S6Max, maybe you're thinking about some older one.

nerdjon 4y ago

I don't understand this, I had a Neato before I switched to iRobot and the lidar just seemed to be the worst idea for a home environment. On an almost weekly basis it would fail to start because it would think it was moved if something just moved a little bit nearby or a cat just happened to be sleeping nearby. This generally forced me to remap Then it would constantly get lost and be confused about what room it was in. Seemingly for the same reasons of things moving around. A home isn't a static environment and a camera just seems much more efficient. Not that a camera is perfect, but at least a camera can account for things moving around were lidar cannot. Or was this a case of Neato just not being good? The lidar issues was why I went with iRobot. It was a worse vacuum but if it actually works consistently than I can just have it run more often.

moepstar 4y ago
I've a Xiami / Roborock S5 for almost 5 years now (give or take a few months) and their LIDAR implementation is absolutely genius - no issues whatsoever, no matter what gets moved around or not... Must've been Neatos implementation i suppose... On top of the really top-notch LIDAR the S5 is beautifully engineered as well - basically everything is a module (i.e. wheel+motor) which is plugged in and secured with a few screws - really good repairability and also spares are available (needed so far: 1 LIDAR motor, 2,50€; 1 resettable fuse for charging).
- KptMarchewa 4y ago
  I would not complement S5 that much. Mine can never return to the dock alone, which is pretty basic - it knows where it is, but tries to move there from a weird angle, repeats this few times and ultimately loudly fails. Also, it always gets stuck on dryer rack. The engineering on the modularity is neat though, I agree.
  - moepstar 4y ago
    Hm, that's strange - i've even used mine in 2 apartments now, on 4 floors no less.. No issues whatsoever - on the floor where there is no dock it just goes back to the point you dropped it off and started cleaning... > Also, it always gets stuck on dryer rack. Have you tried to put some magnetic tape (barrier) on to the legs?

thatfrenchguy 4y ago

> My old setup of the two robots took somewhere on the order of 5-6 hours to do a ~100m2 apartment I mean, yes, the first time, but my i7 takes like 2 hours to do my ~140sqm apartment?

jsmith45 4y ago

I've felt that the iRobot mapping was acceptable. Once my i7 has generated a proper map, it will will slow down when it approaches known walls, or even places where obstacles have been several times in the past. It will need to bump into the obsticle or wall to confirm its position though. It does use a mostly predictable back and forth pattern, taking note of areas with walls/obstacles, and after the main sweeping it will combe back to go around the obstacles, and finally (optional) do a sweep of the walls. Then it moves onto the next room. The system does have limitations. For example, if it needs assistance in the middle of a clean job, after you fix it, there is a reasonable chance that it will do dumb stuff afterwards, like missing a large section of floor. (It seems to even know this, but have problematic coding that prevents it from doing the right thing). But yeah, I'd not call the mapping good, just acceptable. There are other annoyances like the i7 battery being so small, especially since they have a giant battery compartment. Like seriously big enough like ni-cad batteries battery of equivalent capacity. But they only offer a slightly larger capacity battery as part of their Costco exclusive model, and try to lock out third party batteries. The net result is that even when brand new, it could not quite do a single floor of my house in one go, needing to go recharge for like 40 minutes before it could do the last 10 minutes of cleaning. The app is not very good. It does not even do some basic things like prompt the user for regular maintenance periodically based on number of hours used. The floor maps in the app are weird. For example, on one of my floors, the online map decided that the entrance to one of my rooms was on a completely different wall from where the entrance really was. It thought the actual door was just a wall. However the actually mapping data on the robot was just fine. It knew where the door really was, and never tried to drive though the wall where the online map though the door was.