6 ms·

Without taking sides on the issue, these are purposeful trade-offs that the Go team makes. They are trying to avoid bloating the language and making it too diff

Without taking sides on the issue, these are purposeful trade-offs that the Go team makes. They are trying to avoid bloating the language and making it too difficult for them to add optimizations or other features. And I think they would argue that it makes ignoring errors harder, since you have to intentionally discard the error value when it was given to you, which takes conscious effort, rather than omitting it from the code completely like other languages let you.

nomel 8y ago
I find this perspective curious. Maybe it's the non-web field that I work in, but I've never written a program where I could unintentionally ignore errors and have things go as expected after. What are some cases where errors can be ignored? And if they can be, are these neccesarily some sort of "status" rather than "error"?
- sephware 8y ago
  If you're writing a command line utility that tries to load a config file and falls back on defaults if it's not found, you may try to load it and just ignore any error, only caring that it either returns a path if found or null if you should use default values.
  - dwaite 8y ago
    I believe what you are saying is that you can ignore errors if you check or rely on the side effects of an error (such as the result of a function being null on error). One could argue that the side effect is part of the error, and really what you are ignoring are the details of an error (e.g. did the config entry fail to load because the config file wasn't found, because of filesystem permissions, or because the particular configuration key wasn't present?)
    - sephware 8y ago
      That's a good way to put it, and yeah I would agree that's how I like to use errors: give me the details I ask for and let me ignore the ones I don't care about. Sometimes an "error" isn't really an error, and at those times exceptions are overkill. Sometimes an error really is an error and I need to let the user know something went wrong, give them enough details to let them fix it and wait for them to try again.
  - Skunkleton 8y ago
    But wouldn't that look like: var s Settings if s, err := load_settings(); err != nil { s = defaults() } Where is the unhandled error?
    - TheDong 8y ago
      Note that your code will not work; you've shadowed 's' inside the if block because you have 'if s, err := ...'. As a result, 's = defaults()' will set the shadowed 's' variable that only exists within the if block to defaults, but the 'var s Settings' you declared above will not be modified. Here's a playground showing the issue: https://play.golang.org/p/eE0HEZx1MJu https://play.golang.org/p/eE0HEZx1MJu Go is full of nice little foot-guns like that :) You would want to also have 'var err error' above the block and use '=' instead of ':=' to fix this sort of issue.
      - Skunkleton 8y ago
        I am by no means an expert (or even a frequent user) of go. However, the most unfortunate foot cannon I have encountered is this: package main type HowOdd interface { Poke() string } type AConcreteThing struct { } func (t *AConcreteThing) Poke() string { return "hehe" } func DoAConcreteThing() *AConcreteThing { return nil } func DoAThing() HowOdd { return DoAConcreteThing() } func main() { lolWhat := DoAThing() if lolWhat != nil { panic("How could this happen?") } } I understand that the interface at the bottom is a non-null interface containing a null value, but...damn, that sucks.
- deleted 8y ago
  [deleted]
- merb 8y ago
  Well look at: https://golang.org/pkg/database/sql/#DB.Query https://golang.org/pkg/database/sql/#DB.Query How likely is the error going to happen, if you know (through tests and everything) that the query is correct? it can only happen in two scenarios: 1. the database has serious problems 2. the driver is incorrect in normal cases you would probably handle that with a middleware in classical languages. i.e. you would have a middlewre that catches exceptions and handle the error there (logging, paging, whatever) and maybe show a nice looking "we are experience problems now"-page. in golang this is a little bit harder, since you would need to handle the error by every caller and with the default http interface you would actually need to call your "handle default error" in every http handler.
- danmaz74 8y ago
  An example is logging something to a remote server for analytics purposes: you can fire and forget.
aikah 8y ago
> these are purposeful trade-offs that the Go team makes. Trade-offs for whom or with what in mind? the compiler or the programmer? That's the "philosophical" difference between the Rust team and the Go team.
- Skunkleton 8y ago
  Exactly. That is why Rust does so many more things, but Go compiles so fast. Even with two wildly different approaches to language design, each has their place, and their own set of drawbacks.
  - repolfx 8y ago
    It's a false dichotomy. Languages like Java or Kotlin compile fast and have exceptions too.
    - hactually 8y ago
      Not quite - Java is faster than Kotlin [0] but I've never seen a Golang app take more than 10 seconds (and that's something huge like Kubernetes or Docker components) [0] https://medium.com/keepsafe-engineering/kotlin-vs-java-compilation-speed-e6c174b39b5d https://medium.com/keepsafe-engineering/kotlin-vs-java-compi...
      - rhencke 8y ago
        The article you link comes to a different conclusion: > With the Gradle daemon running and incremental compilation turned on, Kotlin compiles as fast or slightly faster than Java.
    - mmirate 8y ago
      Because the JVM takes another tradeoff against Go and Rust: it has a runtime interpreter+JIT, which causes even more performance overhead than Go's GC let alone Rust which - at runtime - is effectively a zero-cost abstraction over C and jemalloc.
eptcyka 8y ago
If it would bring significant amount of technical debt to introduce some synctactic sugar that'd allow to bubble errors up the call stack without 3 extra lines of code, then design choices made for Go seem to be questionable. At least superficially.

nomel 8y ago

I find this perspective curious. Maybe it's the non-web field that I work in, but I've never written a program where I could unintentionally ignore errors and have things go as expected after. What are some cases where errors can be ignored? And if they can be, are these neccesarily some sort of "status" rather than "error"?

sephware 8y ago
If you're writing a command line utility that tries to load a config file and falls back on defaults if it's not found, you may try to load it and just ignore any error, only caring that it either returns a path if found or null if you should use default values.
- dwaite 8y ago
  I believe what you are saying is that you can ignore errors if you check or rely on the side effects of an error (such as the result of a function being null on error). One could argue that the side effect is part of the error, and really what you are ignoring are the details of an error (e.g. did the config entry fail to load because the config file wasn't found, because of filesystem permissions, or because the particular configuration key wasn't present?)
  - sephware 8y ago
    That's a good way to put it, and yeah I would agree that's how I like to use errors: give me the details I ask for and let me ignore the ones I don't care about. Sometimes an "error" isn't really an error, and at those times exceptions are overkill. Sometimes an error really is an error and I need to let the user know something went wrong, give them enough details to let them fix it and wait for them to try again.
- Skunkleton 8y ago
  But wouldn't that look like: var s Settings if s, err := load_settings(); err != nil { s = defaults() } Where is the unhandled error?
  - TheDong 8y ago
    Note that your code will not work; you've shadowed 's' inside the if block because you have 'if s, err := ...'. As a result, 's = defaults()' will set the shadowed 's' variable that only exists within the if block to defaults, but the 'var s Settings' you declared above will not be modified. Here's a playground showing the issue: https://play.golang.org/p/eE0HEZx1MJu https://play.golang.org/p/eE0HEZx1MJu Go is full of nice little foot-guns like that :) You would want to also have 'var err error' above the block and use '=' instead of ':=' to fix this sort of issue.
    - Skunkleton 8y ago
      I am by no means an expert (or even a frequent user) of go. However, the most unfortunate foot cannon I have encountered is this: package main type HowOdd interface { Poke() string } type AConcreteThing struct { } func (t *AConcreteThing) Poke() string { return "hehe" } func DoAConcreteThing() *AConcreteThing { return nil } func DoAThing() HowOdd { return DoAConcreteThing() } func main() { lolWhat := DoAThing() if lolWhat != nil { panic("How could this happen?") } } I understand that the interface at the bottom is a non-null interface containing a null value, but...damn, that sucks.
deleted 8y ago
[deleted]
merb 8y ago
Well look at: https://golang.org/pkg/database/sql/#DB.Query https://golang.org/pkg/database/sql/#DB.Query How likely is the error going to happen, if you know (through tests and everything) that the query is correct? it can only happen in two scenarios: 1. the database has serious problems 2. the driver is incorrect in normal cases you would probably handle that with a middleware in classical languages. i.e. you would have a middlewre that catches exceptions and handle the error there (logging, paging, whatever) and maybe show a nice looking "we are experience problems now"-page. in golang this is a little bit harder, since you would need to handle the error by every caller and with the default http interface you would actually need to call your "handle default error" in every http handler.
danmaz74 8y ago
An example is logging something to a remote server for analytics purposes: you can fire and forget.

aikah 8y ago

> these are purposeful trade-offs that the Go team makes. Trade-offs for whom or with what in mind? the compiler or the programmer? That's the "philosophical" difference between the Rust team and the Go team.

Skunkleton 8y ago
Exactly. That is why Rust does so many more things, but Go compiles so fast. Even with two wildly different approaches to language design, each has their place, and their own set of drawbacks.
- repolfx 8y ago
  It's a false dichotomy. Languages like Java or Kotlin compile fast and have exceptions too.
  - hactually 8y ago
    Not quite - Java is faster than Kotlin [0] but I've never seen a Golang app take more than 10 seconds (and that's something huge like Kubernetes or Docker components) [0] https://medium.com/keepsafe-engineering/kotlin-vs-java-compilation-speed-e6c174b39b5d https://medium.com/keepsafe-engineering/kotlin-vs-java-compi...
    - rhencke 8y ago
      The article you link comes to a different conclusion: > With the Gradle daemon running and incremental compilation turned on, Kotlin compiles as fast or slightly faster than Java.
  - mmirate 8y ago
    Because the JVM takes another tradeoff against Go and Rust: it has a runtime interpreter+JIT, which causes even more performance overhead than Go's GC let alone Rust which - at runtime - is effectively a zero-cost abstraction over C and jemalloc.

eptcyka 8y ago

If it would bring significant amount of technical debt to introduce some synctactic sugar that'd allow to bubble errors up the call stack without 3 extra lines of code, then design choices made for Go seem to be questionable. At least superficially.