8 ms·

This already exists: https://www.tweaktown.com/reviews/8542/asrock-ultra-quad-2-card-16-lane-aic-review/index.html https://www.tweaktown.com/reviews/8542/asrock

• namibj 8y ago
  This is not a low profile card, and wastes quite a lot of space. It should take two cards on each side of the board, with the connectors facing orthogonal to those of the x16 slot.
  • wtallis 8y ago
    You can't put something as tall as a M.2 connector on the back side of an expansion slot without violating the form factor guidelines and enchroaching on the space of the next slot over. The only compliant way to put M.2 drives on the back is to use an offset edge connector so the main board is a bit lower than it usually would be. Amfeltec has some boards like this, but I think they have a patent on their offset connector. http://amfeltec.com/products/pci-express-gen-3-carrier-board-for-4-m-2-ssd-modules/ http://amfeltec.com/products/pci-express-gen-3-carrier-board...
    • namibj 8y ago
      Oh. Well, there are cases where it would fit without such an exotic connector, but those are non-compliant. I assume you don't need licenses for just making a dumb PCIe card, if you don't name it with trademarks? Or are there patents you need to license to sell PCIe-compatible, non-electronic cards?