6 ms·

Why can't you just label the switches, though? A couple strips of paper and tape are all you need. (Of course, the fact that such a fix is necessary does conf

Why can't you just label the switches, though? A couple strips of paper and tape are all you need. (Of course, the fact that such a fix is necessary does confirm that something is wrong with the design.)

asolove 17y ago
How often do you read a label before switching on a light? I work at a building that has a big panel of them, and I still just flip them on and off until it looks right rather than read the label. When it's a matter of handed-or-maimed, don't rely on a label!
shpxnvz 17y ago
I wouldn't even say that it confirms a problem with the design, just that it probably wouldn't be a bad idea to have the thing labeled in the first place. If his sole reason for disliking this particular interface was that he couldn't remember which switch was which, I too am quite surprised that his first thought was to have a new countertop switch installed rather than stick a label on it or grab a sharpie.
nollidge 17y ago
Or put a switch guard [1] on one of the two switches. I've done this in three spots in my house. The guard goes over the switch which is less used. [1] http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?jspStoreDir=hdus&catalogId=10053&productId=100628705&keyword=100628705&langId=-1 http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDi...
JacobAldridge 17y ago
Tangential anecdote - someone in my office went label mad mid last year. I made the observation that anybody who needed a label to know that the only light switch in the meeting room was, indeed, the light switch for the meeting room, was too dumb to benefit from meeting with us anyway.
- derefr 17y ago
  My kitchen has a switch on a little stub of a wall, the other side of which is part of the living room. The living-room-side switch controls the kitchen lights, and vice-versa. It makes sense when you realize that you can use them to do a sort of "airlock" process, turning on the light in the room ahead of you, entering it, then turning around and switching off the lights in the room behind you.

asolove 17y ago

How often do you read a label before switching on a light? I work at a building that has a big panel of them, and I still just flip them on and off until it looks right rather than read the label. When it's a matter of handed-or-maimed, don't rely on a label!

shpxnvz 17y ago

I wouldn't even say that it confirms a problem with the design, just that it probably wouldn't be a bad idea to have the thing labeled in the first place. If his sole reason for disliking this particular interface was that he couldn't remember which switch was which, I too am quite surprised that his first thought was to have a new countertop switch installed rather than stick a label on it or grab a sharpie.

nollidge 17y ago

Or put a switch guard [1] on one of the two switches. I've done this in three spots in my house. The guard goes over the switch which is less used. [1] http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?jspStoreDir=hdus&catalogId=10053&productId=100628705&keyword=100628705&langId=-1 http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDi...

JacobAldridge 17y ago

Tangential anecdote - someone in my office went label mad mid last year. I made the observation that anybody who needed a label to know that the only light switch in the meeting room was, indeed, the light switch for the meeting room, was too dumb to benefit from meeting with us anyway.

derefr 17y ago
My kitchen has a switch on a little stub of a wall, the other side of which is part of the living room. The living-room-side switch controls the kitchen lights, and vice-versa. It makes sense when you realize that you can use them to do a sort of "airlock" process, turning on the light in the room ahead of you, entering it, then turning around and switching off the lights in the room behind you.